bazel_rules_hdl

Hardware Description Language (Verilog, VHDL, Chisel, nMigen, etc) with open tools (Yosys, Verilator, OpenROAD, etc) rules for Bazel (https://bazel.build)

THIS REPO REQUIRES BAZEL 5.4.0 or greater

Installation

In your WORKSPACE file. Which is a file at the top directory of every bazel repo:

# You don't need these variables, but are useful for configurability.
# Feel free to hardcode these values in the maybe http_archive below.
rules_hdl_git_hash = "{LATEST_HASH}"
rules_hdl_git_sha256 = "{LATEST_SHA}"

maybe(
    http_archive,
    name = "rules_hdl",
    sha256 = rules_hdl_git_sha256,
    strip_prefix = "bazel_rules_hdl-%s" % rules_hdl_git_hash,
    urls = [
        "https://github.com/hdl/bazel_rules_hdl/archive/%s.tar.gz" % git_hash,
    ],
)

load("@rules_hdl//dependency_support:dependency_support.bzl", rules_hdl_dependency_support = "dependency_support")
rules_hdl_dependency_support()

load("@rules_hdl//:init.bzl", rules_hdl_init = "init")
rules_hdl_init()

Usage

See the following build file to synthesize a final ASIC design for a given piece of RTL written in verilog.

This file is called counter.v. It is a 128 bit counter incremented on every positive edge of a clock signial.

module counter(
  input wire clk,
  input wire reset,
  output [127:0] out,
);
  reg [127:0] counter_tmp;
  always @ (posedge clk or posedge reset) begin
    if (reset) begin
      counter_tmp <= 0;
    end else begin
      counter_tmp <= counter_tmp + 1;
    end
  end

  assign out = counter_tmp;

endmodule

The default PDK used is the Sky130 High Density standard cells.

This is the BUILD file. Every thing in bazel needs a rule description of what to build. The rules use yosys and OpenROAD to place and route your design.

load("@rules_hdl//synthesis:build_defs.bzl", "synthesize_rtl")
load("@rules_hdl//place_and_route:build_defs.bzl", "place_and_route")
load("@rules_hdl//verilog:providers.bzl", "verilog_library")

place_and_route(
    name = "counter_place_and_route",
    clock_period = "10",
    core_padding_microns = 20,
    die_height_microns = 200,
    die_width_microns = 200,
    placement_density = "0.7",
    synthesized_rtl = ":verilog_counter_synth",
)

synthesize_rtl(
    name = "verilog_counter_synth",
    top_module = "counter",
    deps = [
        ":verilog_counter",
    ],
)

verilog_library(
    name = "verilog_counter",
    srcs = [
        "counter.v",
    ],
)

At this point you should have the following three files at the top of your bazel workspace.

BUILD
counter.v
WORKSPACE

When you run bazel build //:counter_place_and_route. It will output log files and a def file that represents the fully placed and routed design.

Project Vision

hdl/bazel_rules_hdl is a project that is designed to be a one stop shop for doing hardware dev with bazel.

Through iteration we hope to eventually become an official bazel ruleset for doing HDL development.

So that includes;

• Supporting designs targeting FPGAs and ASIC.
• Supporting software targeted to run on this custom hardware.
• Supporting testing via simulation, formal verification, emulation and others.

Having rules that can take RTL and be chained to emit GDSII (Sky130/FOSS-PDKs), but that can also be used to target FPGAs and soft CPUs. We want to take advantage of remote builders to accelerate verification with massively parallel clusters. Using the open source community's tools like Yosys, OpenROAD, Verilator, Surelog etc.

The vision of this is that this repository enables bazel test //mychip/... and bazel build //mychip:gds and in 10 minutes you have verified and emitted a fabricatable design even for the most complex designs.

Contributing

Testing

For testing pull requests please run:

bazel_rules_hdl$ python tools/test_everything.py

Note: bazel test ... does not run the tests in Bazel "remote" repositories, and bazel_rules_hdl bundles together support for several remote repositories -- this script serves as a helper for testing them all explicitly.