#	Project	Subject
1992	Additive Working Group	EXECUTION enum for WAIT
1865	Additive Working Group	WAIT States
1738	Additive Working Group	Path Data Items
1731	Additive Working Group	Material System - Feeder System Container Extension
1729	Additive Working Group	Deposition Rate - Data Item
1728	Additive Working Group	Deposition System - Component
1967	Agent Working Group	Section 8.3.6 ? x-multipart replace information removed in 1.4
1981	Complex Manufacturing Systems WG	Relationship - Section 4.10 of Part 2.0
1980	Complex Manufacturing Systems WG	Relationships - Part 2.0 Section 4.9
1979	Complex Manufacturing Systems WG	Relationships for a Component - Part 2.0 Section 4.4.3.2
1978	Complex Manufacturing Systems WG	Relationships for a Device - Update to Section 4.2.3.2
1971	Complex Manufacturing Systems WG	New Event type data item to reference a device UUID
1922	Complex Manufacturing Systems WG	Agent Behavior for References - Part 1
2116	Executive Committee	Part 1, Section 6.7, Example 7: Type in XML
2094	Executive Committee	Part 3.0 Section 6.2 Table 22 Items are not in Order
2089	Executive Committee	Part3 Example 3: DataItem Represented in MTConnectDevices Document
2088	Executive Committee	Part2 Table 28 Attributes for Dataitem
2087	Executive Committee	Part2 4.10.2 Component Relationship.
2085	Executive Committee	Part2 Terminology and Conventions
2084	Executive Committee	Part2 Table 28 Attributes for Dataitem
1983	Machine Tool Working Group	DATA_SET representation
1961	Machine Tool Working Group	Depricate DISCRETE as a 'representation' enum
1953	Machine Tool Working Group	Occurrence values for @limit@ and @initial@ attributes of @Toollife@
1941	Machine Tool Working Group	Common description for SYSTEM CONDITION type
1939	Machine Tool Working Group	PROGRAMMED as a subType for PathPosition
1909	Machine Tool Working Group	Tool Offset Variable data type?
1829	Machine Tool Working Group	.DISCRETE Filter - discrete attribute
1816	Machine Tool Working Group	nativeName attribute for DataItems
1733	Machine Tool Working Group	Streaming Variables
1713	Machine Tool Working Group	Native Units - Hour and Minute
1709	Machine Tool Working Group	ToolGroup
1708	Machine Tool Working Group	CUTTING_SPEED
1707	Machine Tool Working Group	FeedRate In Time
1706	Machine Tool Working Group	ProgramSource
1705	Machine Tool Working Group	ScheduleProgram and Comment
1704	Machine Tool Working Group	Program Nesting Level
1203	Machine Tool Working Group	section 8.2, Table on line 1109: CONTROLLER_MODE_OVERRIDE - OPTIONAL_STOP
1944	Parts and Processes	PartNumber is not in Part3
1723	Robotics Working Group	Part Detect
--	--	Add Part 4.2 - File Asset Information Model

#	Project	Subject
2186	Additive Working Group	Adding Long term metrics to the dataset
2185	Additive Working Group	Presenting Data that happens at a higher frequency than the MTConnect update rate
2014	Additive Working Group	Add Commanded as a Subtype to Temperature
1659	Additive Working Group	Data type for Humidity
2118	Agent Working Group	Sample request - interval parameter = 0 ??? on page 109 of MTConnect_Part_1.pdf
1855	Agent Working Group	Extend the Query parameters to include LAST ()
1655	Agent Working Group	Definition of Asset Changed
2238	Editorial	Part 2, Section 9.4.1.2 Elements for CoordinateSystem, Table 55
2236	Editorial	Part 3, Table 15 & Table 18: COUNT all caps as attribute in "Attributes for Data Set Observation"
2233	Editorial	XML term CELLS - Part 2.0
2197	Editorial	Missing Subsection 5.5.2 Personnel
2180	Editorial	Format of Table 33, Part 2
2174	Editorial	Attributes for MTConnectStreams Header Example
2143	Editorial	Part 2 Section 8.1 ref #2 - Missing link for ?category?
2126	Editorial	Part 2.0, Lines 1077 - 1102
2099	Editorial	Part 1.0 Http Status Code wording/punctuation
2031	Editorial	Consistent Use of Reference Link for XML
1927	Editorial	"Edit ""6.2.6 xs:any Element for CuttingToolLifeCycle"" for tone"
1908	Editorial	Remove reference to "same shop"
1864	Editorial	Line 799 Sample Element Names Table ACCUMULATED_TIME reference to MACHINE_TIMER is incorrect.
1726	Editorial	WORK_OFFSET referred to as tool offset
1402	Editorial	Suggestions for v1.5 formatting of Part 3
1393	Editorial	Formatting suggestions for part 3
2214	Machine Tool Working Group	New Compositions
2211	Machine Tool Working Group	New TYPES v1.6
2207	Machine Tool Working Group	Consolidate representation for DATA_SET and TABLE to a new section
2196	Machine Tool Working Group	Addition of new Units Revolutions/Second and Revolutions/Second^2
2195	Machine Tool Working Group	Execution State for a Contoller in a MANUAL mode.
2194	Machine Tool Working Group	Represent Work Offsets as Data Set types (Table Support)
2111	Machine Tool Working Group	Resolve PART_COUNT Valid Data Value in Part 3 Table 22
1991	Machine Tool Working Group	SCHEDULE, MAIN, and ACTIVE subtypes for PROGRAM_HEADER DataItem
1984	Machine Tool Working Group	System Component to represent Working Envelope for a piece of equipment
1926	Machine Tool Working Group	Specifications Regarding Software Modules
1757	Machine Tool Working Group	Specifications
1730	Machine Tool Working Group	Value for DIRECTION event when no motion is occurring
1688	Machine Tool Working Group	Defintion of Voltage
1687	Machine Tool Working Group	Definitions of Amperage
1627	Machine Tool Working Group	data type VOLUME
1440	Machine Tool Working Group	Section 6: Composition type table ENCODER definition
1769	Measurement Working Group	Adapt B2MML companion spec for QIF
2209	Ontology Working Group	Create issues from extracted subtypes from documentation
2120	Part 1.0 - Overview and Protocol	version attribute in HEADER of return Document (addressed in 1.5)
1646	Part 2.0 - Devices Information Model	mm/rev for nativeUnits and units (addressed in 1.5)
1624	Part 2.0 - Devices Information Model	Process timer definition (addressed in 1.5)
1364	Part 2.0 - Devices Information Model	Definition of Cycle - Replace with ACTION_COMPLETE (addressed in previous release)
1346	Part 2.0 - Devices Information Model	Table at line 1105 Interface State (addressed in 1.4)
1344	Part 2.0 - Devices Information Model	Table at Line 1105 - Equipment Mode subtype Delay (addressed in 1.5)
1296	Part 2.0 - Devices Information Model	SPINDLE SURFACE SPEED Tags? (addressed with CUTTING_SPEED)
1291	Part 2.0 - Devices Information Model	PROGRAM with subtype for subprogram, schedule program, program name (not program file name) (addressed in 1.5)
1270	Part 2.0 - Devices Information Model	Constant Constraint type of Value (addressed in previous release)
1253	Part 2.0 - Devices Information Model	Constant Constraint (addressed in previous release)
1724	Robotics Working Group	Path Orientation
1721	Robotics Working Group	Coordinate Systems
1720	Robotics Working Group	Joints and Axes
1434	Shop Floor Information Management	Make deviceUuid required
2237	Standards Committee (SC)	Part 4, 3.2.3.1 Common Asset Attributes, Line 284
2234	Standards Committee (SC)	Remove duplicate entries in Part 2 Table 41 EVENTS
2232	Standards Committee (SC)	coordinateSystemIdRef
2225	Standards Committee (SC)	Add term Observation and Observable
2212	Standards Committee (SC)	Add the term Organize
2188	Standards Committee (SC)	Revise nativeUnits to specify that it includes units
2179	Standards Committee (SC)	Part 4.1 - Cutting Tools - 6.2.10.2 Elements for CuttingItem
2121	Standards Committee (SC)	Kurtosis for Statistic
2071	Standards Committee (SC)	Create a separate section for Configuration and the Configuration model
2070	Standards Committee (SC)	Part 2: Combine sections 4.2 (Device) and 4.4 (Component) for common elements
2012	Standards Committee (SC)	Revise definition of Part 4.1: "Devices"
2011	Standards Committee (SC)	Part 2: 4.8.2 DataItemRef name attribute
2010	Standards Committee (SC)	Part 2: 4.8.1 ComponentRef name attribute
2007	Standards Committee (SC)	Part. 2: 4.6 Composition
1788	Standards Committee (SC)	Add Composition for Name Attribute

#	Project	Subject
1739	Additive Working Group	Extend Asset Modeling to Support Deposition System and Material Containers
2442	Machine Tool Working Group	Add Unit for DATE in W3C ISO 8601 format
2402	Machine Tool Working Group	Subtypes for ACCELERATION
2119	Machine Tool Working Group	6.2.10.2.5 type Attribute for ItemLife
1806	Machine Tool Working Group	CuttingToolLifeCycle - ProgramToolNumber
1714	Machine Tool Working Group	Accumulated Values
2412	Ontology Working Group	Discrepancy between the table and schema diagram for ComponentStream multiplicity
2400	Ontology Working Group	Review Component Definitions and Rewrite to reflect the model
2210	Ontology Working Group	Harmonize Data Item sub-types
1229	Ontology Working Group	Section 8.1, Definition of ELECTRICAL_ENERGY in the table
1171	Ontology Working Group	Sect 5.6, Should Auxiliaries contain both 'Loader System" and "BarFeeder System"
2427	Parts and Processes	Process State and Processing State Data Items
2373	Parts and Processes	New Top Level Component Part(s)
2408	Robotics Working Group	Add DESCRIPTION to Coordinate System
2215	Robotics Working Group	Add coordinateSystemIdRef to Component
2483	Shop Floor Information Management	QIF Section 4.x Introduction
2376	Shop Floor Information Management	Quality Information Framework Asset
2496	Standards Committee (SC)	AVAILABILITY Description
2495	Standards Committee (SC)	ACCUMILATED_TIME units
2401	Thermal Processes Working Group	PRESSURIZATION_RATE
2386	Thermal Processes Working Group	Need a composition for the bar lock or door lock
2363	Thermal Processes Working Group	Valve state or position

Releases: mtconnect/mtconnect_sysml_model

Version 2.3 (February 2024)

Version 2.2 (July 2023)

What's Changed

New Contributors

Contributors

Version 2.1 (January 2023)

Version 2.0 (May 2022)

Version 1.7 (May 2021)

Contributors

Version 1.6 (September 2020)

Version 1.5.0 (December 2019)

Contributors

Version 1.8 (October 2021)