Update Readme per PR#1538 changes

feature/bgp/prefixlimit/ate_tests/bgp_prefix_limit_test/README.md

@@ -0,0 +1,51 @@
+# RT-1.5: BGP Prefix Limit
+
+## Summary
+
+BGP Prefix Limit
+
+## Procedure
+
+*   Configure eBGP session between ATE port-1 and DUT port-1,with an Accept-route all import-policy/export-policy under the BGP peer-group AFI/SAFI.
+*   With maximum prefix limits of unlimited, and N.
+    *   Advertise prefixes of `limit - 1`, `limit`, `limit + 1`. Validate
+        session state meets expected value at ATE.
+    *   Ensure that DUT marks session as prefix-limit exceeded for limit+1
+        prefixes.
+*   Advertise prefixes to exceed configured limit, and to `limit - 1` following
+    session teardown, ensure session is re-established per the restart timer
+    (with ATE session marked as passive).
+*   With maximum-prefix warning-only configured, ensure that the routes that
+    were sent prior to the max-prefix being exceeded are retained in the routing
+    table by forwarding traffic to `prefix{0..n-1}` and `prefix{n}` where n is
+    the maximum prefix limit configured.
+
+## Config Parameter coverage
+
+For prefixes:
+
+*   /network-instances/network-instance/protocols/protocol/bgp/peer-groups/peer-group/
+*   /network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor
+
+Parameters:
+
+*   afi-safis/afi-safi/ipv4-unicast/prefix-limit/config/max-prefixes
+*   afi-safis/afi-safi/ipv4-unicast/prefix-limit/config/restart-timer
+
+## Telemetry Parameter coverage
+
+*   TODO: afi-safis/afi-safi/ipv\[46\]-unicast/prefix-limit/state/restart-timer
+*   TODO:
+    afi-safis/afi-safi/ipv\[46\]-unicast/prefix-limit/state/warning-threshold-pct
+*   TODO:
+    afi-safis/afi-safi/ipv\[46\]-unicast/prefix-limit/state/max-prefix-limit
+*   TODO:
+    afi-safis/afi-safi/ipv\[46\]-unicast/prefix-limit/state/prefix-limit-exceeded
+
+## Protocol/RPC Parameter coverage
+
+N/A
+
+## Minimum DUT platform requirement
+
+vRX

feature/bgp/prefixlimit/otg_tests/bgp_prefix_limit_test/README.md

@@ -6,7 +6,7 @@ BGP Prefix Limit
 
 ## Procedure
 
-*   Configure eBGP session between ATE port-1 and DUT port-1,with an Accept-route all import-policy/export-policy under the neighbor AFI/SAFI.
+*   Configure eBGP session between ATE port-1 and DUT port-1,with an Accept-route all import-policy/export-policy under the BGP peer-group AFI/SAFI.
 *   With maximum prefix limits of unlimited, and N.
     *   Advertise prefixes of `limit - 1`, `limit`, `limit + 1`. Validate
         session state meets expected value at ATE.

feature/bgp/tests/local_bgp_test/README.md

@@ -8,7 +8,7 @@ The local\_bgp\_test brings up two OpenConfig controlled devices and tests that
 * Disconnected between them.
 * Verify BGP neighbor parameters
 
-Enable an Accept-route all import-policy/export-policy for eBGP session under the neighbor AFI/SAFI.
+Enable an Accept-route all import-policy/export-policy for eBGP session under the BGP peer-group AFI/SAFI.
 
 
 This test is suitable for running in a KNE environment.

feature/bgp/timers/otg_tests/bgp_keepalive_and_holdtimer_configuration_test/README.md

@@ -8,7 +8,7 @@ BGP Keepalive and HoldTimer Configuration Test
 
 *   Establish eBGP sessions as follows between ATE and DUT
     * The DUT has eBGP peering with ATE port 1 and ATE port 2.
-    * Enable an Accept-route all import-policy/export-policy under the neighbor AFI/SAFI.
+    * Enable an Accept-route all import-policy/export-policy under the BGP peer-group AFI/SAFI.
     * The first pair is called the "source" pair, and the second the "destination" pair
 
 *  Validate BGP session state on DUT using telemetry.