This intention of this README is to explain how a DKMS enabled module RPM functions and also how DKMS can be used in conjunction with tarballs which contain a dkms.conf file within them.
The DKMS project (and any updates) can be found at: https://github.com/dell/dkms
To install DKMS itself, you simply install (or upgrade) it like any other RPM:
rpm -Uvh dkms-<version>-<release>.noarch.rpm
This is a prerequisite to installing DKMS-enabled module RPMs.
To install a DKMS enabled module RPM, you simply install it like any other RPM:
rpm -ivh <module>-<version>-<rpmversion>.noarch.rpm
With a DKMS enabled module RPM, most of the installation work done by the RPM is actually handed off to DKMS within the RPM. Generally it does the following:
- Installs module source into
/usr/src/<module>-<moduleversion>/ - Places a dkms.conf file into
/usr/src/<module>-<moduleversion>/ - Runs:
# dkms add -m <module> -v <version> - Runs:
# dkms build -m <module> -v <version> - Runs:
# dkms install -m <module> -v <version>
Once the RPM installation is complete, you can use DKMS to understand which module and which moduleversion is installed on which kernels. This can be accomplished via the command:
# dkms status
From here, you can then use the various DKMS commands (eg. add, build, install, uninstall) to load that module onto other kernels.
DKMS is not limited to installation via RPM only. In fact, DKMS can also install directly from the following:
- Generic module source tarballs which contain a dkms.conf file
- Specially created DKMS tarballs with module source, pre-built module binaries and a dkms.conf file
- Specially created DKMS tarballs with pre-built module binaries and a dkms.conf file
- Manual placement of module source and dkms.conf file into
/usr/src/<module>-<moduleversion>/directory
In order to load any tarball into the DKMS tree, you must use the following command:
# dkms ldtarball /path/to/dkms_enabled.tar.gz
This command will first inspect the tarball to ensure that it contains a dkms.conf configuration file for that module. If it cannot find this file anywhere within the archive, then the ldtarball will fail.
From here, it will place the source in the tarball into /usr/src/<module>-<moduleversion>/. If source already exists in the directory, it will not
overwrite it unless the --force option is specified. If the tarball is of type
"c" above and does not contain source, it will only continue to load the
tarball if existing module source is found in /usr/src/<module>-<moduleversion>/
or if the --force option is specified.
Continuing on, if the tarball is of type "b" or "c" it will then load any
pre-built binaries found within the tarball into the dkms tree, but will stop
short of installing them. Thus, all pre-built binaries will then be of in the
built state when checked from the dkms status command. You can then use the
dkms install command to install any of these binaries.
To create a tarball of type "1" above, you need only to take module source and a
dkms.conf file for that module and create a tarball from them. Tarballs of
type 2 or type 3 are created with the dkms mktarball command. To create
a type 3 tarball, you must specify the flag --binaries-only with the
mktarball.
If you choose not to load module source on your system or if you choose not to load a compiler such as gcc onto your system, DKMS can still be used to install modules. It does this through use of DKMS binary only tarballs as explained in this README under tarballs of type c.
If your system does not have module source, loading the dkms tarball will fail because of this. To avoid this, use the --force flag, as such:
# dkms ldtarball /path/to/dkms_enabled.tar.gz --force
This will load the pre-built binaries into the dkms tree, and create the
directory /usr/src/<module>-<moduleversion>/ which will only contain the
module's dkms.conf configuration file. Once the tarball is loaded, you can then
use dkms install to install any of the pre-built modules.
Of course, since module source will not be located in your dkms tree, you will not be able to build any modules with DKMS for this package.
Once DKMS is installed, you can reference its man page for further information on different DKMS options and also to understand the formatting of a module's dkms.conf configuration file.
You may also wish to join the dkms-devel public mailing-list at http://lists.us.dell.com/.
The DKMS project is located at: https://github.com/dell/dkms