DEPRECATED

Please Use Chipyard (https://github.com/ucb-bar/chipyard) for building BOOM

DO NOT USE

DO NOT USE

DO NOT USE

RISC-V BOOM Project Template

This is a starter template for your own RISC-V BOOM project.

BOOM is a superscalar, out-of-order processor that implements the RISC-V RV64GC ISA. BOOM is a synthesizable core that targets ASIC processes, and is written in the Chisel hardware construction language.

Feature	BOOM
ISA	RISC-V (RV64GC)
Synthesizable	√
FPGA	√
Parameterized	√
Floating Point (IEEE 754-2008)	√
Atomic Memory Op Support	√
Caches	√
Viritual Memory	√
Boots Linux	√
Privileged Arch v1.11	√
External Debug	√

You can find more information about BOOM here: (github.com/riscv-boom/riscv-boom).

Google group: (https://groups.google.com/forum/#!forum/riscv-boom)

Submodules and Subdirectories

The submodules and subdirectories for the project template are organized as follows.

• bootrom - points to the bootroms provided by rocket-chip
• rocket-chip - contains code for the RocketChip generator, Chisel HCL, and FIRRTL
• boom - contains code for the BOOM core and tile.
• scripts - bash scripts for initializing repo, building RISC-V toolchain
• verisim - directory in which Verilator simulations are compiled and run
• vsim - directory in which Synopsys VCS simulations are compiled and run
• src/main/scala - scala source files for your project extension can go here

Getting Started

Checking out the sources

After cloning this repo, you will need to initialize all of the submodules. You can choose whether to get the RISC-V toolchain also. First to get the repository do:

git clone https://github.com/riscv-boom/boom-template.git
cd boom-template

Then if you want the RISC-V toolchain sources you can run the following (note: this puts the sources in the directory above boom-template):

./scripts/init-submodules.sh

Otherwise you can run the following:

./scripts/init-submodules-no-riscv-tools.sh

Building the tools

The tools repo riscv-tools contains the cross-compiler toolchain, frontend server, and proxy kernel, which you will need in order to compile code to RISC-V instructions and run them on your design. There are detailed instructions at https://github.com/riscv/riscv-tools. But to get a basic installation that will work with BOOM, just the following steps are necessary.

# You may want to add the following two lines to your shell profile
export RISCV=/path/to/install/dir
export PATH=$RISCV/bin:$PATH

cd boom-template
./scripts/build-tools.sh

Compiling and running the Verilator simulation

To compile a BOOM simulator, run make in the "verisim" directory. This will elaborate the BoomConfig from the boom.system project.

cd verisim
make

An executable called simulator-boom-system-BoomConfig will be produced. You can then use this executable to run any compatible RV64G code. For instance, to run one of the riscv-tools assembly tests.

make output/rv64ui-p-simple.out

Or execute the entire riscv-tests suite:

make run

Or just a smaller regression suite:

make run-regression-tests

If you would like to get a .vpd waveform, you can instead use:

make output/rv64ui-p-simple.vpd

Or:

make run-debug

If you later create your own project, you can use environment variables to build an alternate configuration. The different variables are

• PROJECT: The package that contains your test harness class
• CFG_PROJECT: The package that contains your config class
• GENERATOR_PROJECT: The package that contains your Generator class
• MODEL: The class name of your test harness
• CONFIG: The class name of your config

You can manually override them like this

make PROJECT=yourproject CONFIG=YourConfig
./simulator-yourproject-YourConfig ...

Running random tests with torture or csmith utilities

RISC-V Torture is included as a submodule and includes the ability to test BOOM. You can run a single test like so:

make rgentest R_SIM=../vsim/simv-boom.system-BoomConfig

You can run a nightly test, which runs for a set amount of time or a set number of failures like this:

make rnight R_SIM=../vsim/simv-boom.system-BoomConfig OPTIONS="-C config/default.config -t 5 -m 30"

Additionally, in scripts/csmith is a script to run auto-generated csmith tests. This can be invoked like this:

cd scripts/csmith
./install-csmith.sh # installs csmith to $RISCV
./run-csmith.sh --sim VERILATOR_SIM [--run NUMBER_OF_CSMITH_TESTS] [--parallel NUM_OF_PARALLEL_INSTANCES]

FAQ

How can I add peripherals such as testchipip to BOOM?

This repository is based off of https://github.com/ucb-bar/project-template and follows a similar procedure to add peripherals. Here is a brief set of instructions to follow:

First, add your submodule, say yourproject to the boom-template repository. Your sources should be in the yourproject/src/main/scala/... directory. Next, in the build.sbt you need to add a new line indicating what projects (rocket-chip, boom, etc) yourproject depends on. It would look something like this:

lazy val yourproject = (project in file("yourproject")).settings(commonSettings).dependsOn(rocketchip, boom)

Next, to make sure that make notices changed sources, add yourproject to EXTRA_PACKAGES in the Makefrag. Now, your sources should be found and built in the SBT build. If you want to make the default project be yourproject make sure to also change the following line in build.sbt:

onLoad in Global ~= (_ andThen ("project yourproject" :: _))

For more detailed instructions please go to the project-template repository.

Searching through the codebase is confusing -- How can I generate ctags for easy code navigation?

Located in boom-template/scripts/ is a quick ctags script called gen-tags.sh to help parse the codebase for relevant tags to use with compatible editors. To generate tags run

# from the boom-template directory
./scripts/gen-tags.sh

This should create a tags file in the boom-template directory for you to use!

Note that this script requires Exuberant Ctags.

Git submodules are confusing -- how do I update to the latest BOOM?

The boom and rocket-chip repositories are included as git submodules. This allows us to tag specific versions that should work together. You can think of git submodules as "pointers" to specific commits.

To update this repository and then update

cd boom-template
git pull                         # update this repo and the pointers to the submodules.
git submodule update --recursive # update the contents of the submodules (and their submodules).
git status                       # check boom/rocket-chip don't have "new commits".

As rocket-chip itself has additional git submodules, you will need to perform a recursive submodule update. This may take a while.

How do I use VCS instead of Verilator?

The verisim directory manages the Verilator build and run process.

The vsim directory manages the VCS build and run process.

In either directory you can build and then run the riscv-tests using make && make debug.

How do I get a waveform?

The testharness/build-system is currently set up to provide a vpd or a fsdb waveform file.

To get a vpd dump, go to the verisim or vsim directories and instead of invoking make, you can invoke make debug to build a vpd waveform-output-enabled BOOM simulator. The simulator will now be suffixed with -debug. Warning: Verilator takes a very long time to compile with waveform output enabled.

To run all of the riscv-tests with vpd waveform output, you can invoke make run-debug.

Individually, you run a specific test as make output/rv64ui-p-simple.out to run a regular test or make output/rv64ui-p-simple.vpd to generate a vpd waveform.

To get a fsdb dump, go to the vsim directory and invoke make fsdb_debug to build a fsdb waveform-output-enabled BOOM simulator. The simulator will now be suffixed with fsdb-debug. Do not do this under the verisim directory. You cannot generate a fsdb enabled Verilator simulator.

You can generate fsdb waveforms only when running tests individually with commands of the form make output/rv64ui-p-simple.fsdb. To invoke the verdi verification tool, run make output/rv64ui-p-simple.verdi. If the required fsdb file is not available, this make command will generate it first before starting verdi.

Read the Makefile to find all of the special targets.

BOOM takes forever to compile.

You can add to your bash profile:

export MAKEFLAGS="-j `echo \`nproc\`*2/2|bc`"

This will spawn as many threads as you have cores when invoking make, speed up compilation, and run the riscv-tests in parallel.

Warning: if you are performing VCS simulation you will burn through your precious licenses.

Warning: if you are writing a lot of data to the *.out files or *.vpd files you may hose your file system.

Unfortunately, many of the structures in an OOO processor scale worse than linearly. Also, some compilers struggle with large functions that arise when you turn the auto-generated Verilog into straight-line C++ code that is flattened across the whole design. As such, VCS compiles much faster than Verilator (but runs much slower).

Here are some times as measured on my machine using the verilator simulator:

• make CONFIG=MegaBoomConfig run takes 57 minutes.

• make CONFIG=BoomConfig run takes 39 minutes.

• make CONFIG=SmallBoomConfig run takes 15 minutes.

To improve the speed of your run-debug loop, you can instead invoke a smaller set of tests:

make run-regression-tests

Help! BOOM isn't working!

First verify the software is not an issue. Run spike first:

# Verify it works on spike.
spike --isa=rv64imafd my_program

# Then we can run on BOOM.
./emulator-freechips.rocketchip.system-SmallBoomConfig my_program

Also verify the riscv-tools you built is the one pointed to within the boom-template/rocket-chip/riscv-tools repository. Otherwise a version mismatch can easily occur!

How do I debug BOOM?

When opening up the waveform, a good set of starting signals are (located in TestDriver.testHarness.dut.tile.core):

• debug_tsc_reg (cycle counter)
• debug_irt_reg (retired instruction counter)
• rob_io_commit_valids_* (the commit signals)
• csr_io_pc (roughly the commit pc)
• br_unit_brinfo_valid (was a branch/jalr resolved?)
• br_unit_brinfo_mispredict (was a branch/jalr mispredicted?)
• dis_valids_* (are any instructions being dispatched to the issue units?)
• dis_uops_*_pc (what are the PCs of the dispatched instructions?)

How do I get a commit log out of BOOM? Out of spike?

Go to boom/src/main/scala/common/consts.scala and change COMMIT_LOG_PRINTF to true. That will output a log of committed instructions.

You can rebuild the spike ISA simulator to also print out a commit log to compare against.

cd rocket-chip/riscv-tools/riscv-isa-sim;
mkdir build
cd build
../configure --prefix=$RISCV --with-fesvr=$RISCV --enable-commitlog

Your new spike will ALWAYS print out a commit log to stderr. I recommend you change the prefix to a different directory (and also build a new riscv-fesvr to be placed in this same directory), rename your spike to something else (e.g., lspike), and add this prefix/bin to your path. In this manner, you won't overwrite your regular spike binary.

Why are the commit logs of BOOM and spike so different?

Frustrating, right?

By default, the BOOM simulators built within the verisim and vsim directories are tethered to the riscv-fesvr (to handle binary loading and proxying syscalls). The actual binary loading is performed using the Debug Transport Module (DTM) which implements the RISC-V External Debug Specification. The riscv-fesvr magically sends signals to the DTM to interrupt BOOM and have it execute out of the Debug Program Buffer. In this manner, BOOM slowly loads the binary into its target memory.

To proxy syscalls, the DTM occasionally interrupts the BOOM core to have it read a special tohost memory location. If the tohost value is non-zero, the BOOM core has a message for the riscv-fesvr to handle.

Spike is also tethered to the riscv-fesvr, but it can instantly load the test binary directly (and magically) into its target memory. There is no invocation of the Debug specification to do this.

Eventually, BOOM and spike will converge after they have each loaded the test binary into their memories. They will again diverge on occasion to send proxy syscalls to the host, spinning for indeterminate amounts of time while waiting for a fromhost message (by repeatedly reading an agreed-upon fromhost address in memory).

There are other ways to load binaries and control the design-under-test. The (https://github.com/ucb-bar/testchipip) repository provides a Tethered Serial Interface (TSI) which can directly and coherently write into the target memory to load programs and query for tohost communications. This requires a different bootrom as well as different top-level I/O connections to wire-up this TSI. This is less invasive than repeatedly polling through the DTM, but also more special-purpose built.

Or, one could build a self-hosting BOOM system. But you need to provide the appropriate drivers, IP blocks, and bootrom to communicate with the system in some manner. An example self-hosted rocket-chip system that follows the project-template layout is the (https://github.com/sifive/freedom) platform.

Processors are hard.

VIM/bash isn't a development environment! How do I setup an IntelliJ IDE?

Boom-template/rocket-chip/boom comes with a quite a project hierarchy that may be hard to keep track of in its entirety. Here's some steps to get started with IntelliJ. This section is a work-in-progress, so please share your own tips and hints on the mailing list.

Step 1: Install a JDK (you have probably already done this, but you need to find it). If you are using OSX, I recommend:

brew tap caskroom/versions
brew update
brew cask install java8

This will give you a jdk that is probably in /Library/Java/JavaVirtualMachines.

Step 2: Follow the above instructions to check out boom-template and build a BOOM emulator. Run it through some tests to make sure everything works. This is important, as this will build a lib file full of jar files of Chisel, FIRRTL, RocketChip, BOOM, and others.

Step 3: Import a project in IntelliJ. Select boom-template/build.sbt. Use Java 1.8.

Step 4: Right-click on boom-template/lib in your project hierarchy and Add as Library.

Step 5: Right-click on boom-template/boom/src and Mark Directory as -> Sources Root. IntelliJ can't find source code that is not under boom-template/src/main/scala without help.

Step 6: Right-click on boom/src/main/scala/system/Generator and Run. It will fail.

Step 7: Open Run->Edit Configurations.. and add the following arguments to your program arguments (main class should be boom.system.Generator). Replace ${TEMPLATE} with what is appropriate for your system.

${TEMPLATE}/verisim/generated-src boom.system TestHarness boom.system BoomConfig

That string comes from Makefrag-variables. You can change BoomConfig to match your desired ${CONFIG}.

Step 8: Run your Generator target. It should now generate firrtl code. However, the rest of the boom-template system relies on Makefiles to string everything together. You can either build additional Run configurations, or connect to the existing Makefiles.

Step 9: Go to Preferences->Plugins and add Makefile support.

Step 10: Right-click on on boom-template/verisim/Makefile and run Makefile. This should compile a BOOM verilator-based emulator.

Step 11: Edit your Run->Edit Configurations.. to add new Run configurations for additional Make targets and ${CONFIG} options. For development, make $CONFIG=SmallBoomConfig run-regression-tests is one recommended command. You can also choose to invoke Make manually in your terminal.

Step 12: Browse the boom source code. Notice that you can highlight a variable and see its definition (or see its instantiations). You can also browse the View->Tool Windows->Structure to see what variables are in scope for a particular class. Click on show inherited to see more, in particular, what the traits might be bringing in to scope!

Step 13: Provide feedback and pull requests to this README (or elsewhere). I am hoping that some find this useful and can provide more guidance on how to improve the IntelliJ/ boom-template flow for those that may follow.

Additional Information from the Project-Template README

The original source of boom-template derives from (https://github.com/ucb-bar/project-template). Please visit it to learn more about adding your own devices or submodules to this template.