This repository contains Ansible roles and playbooks to install and uninstall FreeIPA servers
, replicas
and clients
. Also modules for group, host, topology and user management.
Note: The Ansible playbooks and roles require a configured Ansible environment where the Ansible nodes are reachable and are properly set up to have an IP address and a working package manager.
- Server, replica and client deployment
- Cluster deployments: Server, replicas and clients in one playbook
- One-time-password (OTP) support for client installation
- Repair mode for clients
- Backup and restore, also to and from controller
- Smartcard setup for servers and clients
- Modules for automembership rule management
- Modules for automount key management
- Modules for automount location management
- Modules for automount map management
- Modules for certificate management
- Modules for config management
- Modules for delegation management
- Modules for dns config management
- Modules for dns forwarder management
- Modules for dns record management
- Modules for dns zone management
- Modules for group management
- Modules for hbacrule management
- Modules for hbacsvc management
- Modules for hbacsvcgroup management
- Modules for host management
- Modules for hostgroup management
- Modules for idoverridegroup management
- Modules for idoverrideuser management
- Modules for idp management
- Modules for idrange management
- Modules for idview management
- Modules for location management
- Modules for netgroup management
- Modules for permission management
- Modules for privilege management
- Modules for pwpolicy management
- Modules for role management
- Modules for self service management
- Modules for server management
- Modules for service management
- Modules for service delegation rule management
- Modules for service delegation target management
- Modules for sudocmd management
- Modules for sudocmdgroup management
- Modules for sudorule management
- Modules for topology management
- Modules for trust management
- Modules for user management
- Modules for vault management
FreeIPA versions 4.6 and up are supported by all roles.
The client role supports versions 4.4 and up, the server role is working with versions 4.5 and up, the replica role is currently only working with versions 4.6 and up.
- RHEL/CentOS 7.4+
- Fedora 26+
- Ubuntu
- Debian 10+ (ipaclient only, no server or replica!)
Controller
- Ansible version: 2.13+
Node
- Supported FreeIPA version (see above)
- Supported distribution (needed for package installation only, see above)
External signed CA
External signed CA is now supported. But the currently needed two step process is an issue for the processing in a simple playbook.
Work is planned to have a new method to handle CSR for external signed CAs in a separate step before starting the server installation.
GIT repo
The simplest method for now is to clone this repository on the controller from github directly and to start the deployment from the ansible-freeipa directory:
git clone https://github.com/freeipa/ansible-freeipa.git
cd ansible-freeipa
You can use the roles directly within the top directory of the git repo, but to be able to use the management modules in the plugins subdirectory, you have to either adapt ansible.cfg
or create links for the roles, modules or directories.
You can either adapt ansible.cfg:
roles_path = /my/dir/ansible-freeipa/roles
library = /my/dir/ansible-freeipa/plugins/modules
module_utils = /my/dir/ansible-freeipa/plugins/module_utils
Or you can link the directories:
ansible-freeipa/roles to ~/.ansible/
ansible-freeipa/plugins/modules to ~/.ansible/plugins/
ansible-freeipa/plugins/module_utils to ~/.ansible/plugins/
RPM package
There are RPM packages available for Fedora 29+. These are installing the roles and modules into the global Ansible directories for roles
, plugins/modules
and plugins/module_utils
in the /usr/share/ansible
directory. Therefore is it possible to use the roles and modules without adapting the names like it is done in the example playbooks.
Ansible Galaxy
This command will get the whole collection from galaxy:
ansible-galaxy collection install freeipa.ansible_freeipa
Ansible galaxy does not support the use of dash ('-') in a name and is automatically replacing this with an underscore ('_'). Therefore the name is ansible_freeipa
. The ansible_freeipa collection will be placed in the directory ~/.ansible/collections/ansible_collections/freeipa/ansible_freeipa
where it will be automatically be found for this user.
The most important parts of the inventory file is the definition of the nodes, settings and the management modules. Please remember to use Ansible Vault for passwords. The examples here are not using vault for better readability.
Master server
The master server is defined within the [ipaserver]
group:
[ipaserver]
ipaserver.test.local
There are variables that need to be set like domain
, realm
, admin password
and dm password
. These can be set in the [ipaserver:vars]
section:
[ipaserver:vars]
ipaadmin_password=ADMPassword1
ipadm_password=DMPassword1
ipaserver_domain=test.local
ipaserver_realm=TEST.LOCAL
The admin principal is admin
by default. Please set ipaadmin_principal
if you need to change it.
You can also add more setting here, like for example to enable the DNS server or to set auto-forwarders:
[ipaserver:vars]
ipaserver_setup_dns=yes
ipaserver_auto_forwarders=yes
But also to skip package installation or firewalld configuration:
[ipaserver:vars]
ipaserver_install_packages=no
ipaserver_setup_firewalld=no
The installation of packages and also the configuration of the firewall are by default enabled.
Note that it is not enough to mask systemd firewalld service to skip the firewalld configuration. You need to set the variable to no
.
For more server settings, please have a look at the server role documentation.
Replica
The replicas are defined within the [ipareplicas]
group:
[ipareplicas]
ipareplica1.test.local
ipareplica2.test.local
If the master server is already deployed and there are DNS txt records to be able to auto-detect the server, then it is not needed to set domain
or realm
for the replica deployment. But it might be needed to set the master server of a replica because of the topology. If this is needed, it can be set either in the [ipareplicas:vars]
section if it will apply to all the replicas in the [ipareplicas]
group or it is possible to set this also per replica in the [ipareplicas]
group:
[ipareplicas]
ipareplica1.test.local
ipareplica2.test.local ipareplica_servers=ipareplica1.test.local
This will create a chain from ipaserver.test.local <- ipareplica1.test.local <- ipareplica2.test.local
.
If you need to set more than one server for a replica (for fallbacks etc.), simply use a comma separated list for ipareplica_servers
:
[ipareplicas_tier1]
ipareplica1.test.local
[ipareplicas_tier2]
ipareplica2.test.local ipareplica_servers=ipareplica1.test.local,ipaserver.test.local
The first entry in ipareplica_servers
will be used as the master.
In this case you need to have separate tasks in the playbook to first deploy replicas from tier1 and then replicas from tier2:
---
- name: Playbook to configure IPA replicas (tier1)
hosts: ipareplicas_tier1
become: true
roles:
- role: ipareplica
state: present
- name: Playbook to configure IPA replicas (tier2)
hosts: ipareplicas_tier2
become: true
roles:
- role: ipareplica
state: present
You can add settings for replica deployment:
[ipareplicas:vars]
ipaadmin_password=ADMPassword1
ipadm_password=DMPassword1
ipaserver_domain=test.local
ipaserver_realm=TEST.LOCAL
You can also add more setting here, like for example to setup DNS or to enable auto-forwarders:
[ipareplica:vars]
ipaserver_setup_dns=yes
ipaserver_auto_forwarders=yes
If you need to skip package installation or firewalld configuration:
[ipareplicas:vars]
ipareplica_install_packages=no
ipareplica_setup_firewalld=no
The installation of packages and also the configuration of the firewall are by default enabled.
Note that it is not enough to mask systemd firewalld service to skip the firewalld configuration. You need to set the variable to no
.
For more replica settings, please have a look at the replica role documentation.
Client
Clients are defined within the [ipaclients] group:
[ipaclients]
ipaclient1.test.local
ipaclient2.test.local
ipaclient3.test.local
ipaclient4.test.local
For simple setups or in defined client environments it might not be needed to set domain or realm for the replica deployment. But it might be needed to set the master server of a client because of the topology. If this is needed, it can be set either in the [ipaclients:vars} section if it will apply to all the clients in the [ipaclients] group or it is possible to set this also per client in the [ipaclients] group:
[ipaclients]
ipaclient1.test.local ipaclient_servers=ipareplica1.test.local
ipaclient2.test.local ipaclient_servers=ipareplica1.test.local
ipaclient3.test.local ipaclient_servers=ipareplica2.test.local
ipaclient4.test.local ipaclient_servers=ipareplica2.test.local
If you need to set more than one server for a client (for fallbacks etc.), simply use a comma separated list for ipaclient_servers
.
You can add settings for client deployment:
[ipaclients:vars]
ipaadmin_password=ADMPassword1
ipaserver_domain=test.local
ipaserver_realm=TEST.LOCAL
For enhanced security it is possible to use a auto-generated one-time-password (OTP). This will be generated on the (first) server.
To enable the generation of the one-time-password:
[ipaclients:vars]
ipaclient_use_otp=yes
For more client settings, please have a look at the client role documentation.
Cluster
If you want to deploy more than a master server at once, then it will be good to define a new group like [ipacluster]
that contains all the other groups [ipaserver]
, [ipareplicas]
and [ipaclients]
. This way it is not needed to set domain
, realm
, admin password
or dm password
for the single groups:
[ipacluster:children]
ipaserver
ipareplicas
ipaclients
[ipacluster:vars]
ipaadmin_password=ADMPassword1
ipadm_password=DMPassword1
ipaserver_domain=test.local
ipaserver_realm=TEST.LOCAL
All these settings will be available in the [ipaserver]
, [ipareplicas]
and [ipaclient]
groups.
Topology
With this playbook it is possible to add a list of topology segments using the ipatopologysegment
module.
---
- name: Add topology segments
hosts: ipaserver
become: true
gather_facts: false
vars:
ipaadmin_password: password1
ipatopology_segments:
- {suffix: domain, left: replica1.test.local, right: replica2.test.local}
- {suffix: domain, left: replica2.test.local, right: replica3.test.local}
- {suffix: domain, left: replica3.test.local, right: replica4.test.local}
- {suffix: domain+ca, left: replica4.test.local, right: replica1.test.local}
tasks:
- name: Add topology segment
ipatopologysegment:
password: "{{ ipaadmin_password }}"
suffix: "{{ item.suffix }}"
name: "{{ item.name | default(omit) }}"
left: "{{ item.left }}"
right: "{{ item.right }}"
#state: present
#state: absent
#state: checked
state: reinitialized
loop: "{{ ipatopology_segments | default([]) }}"
The playbooks needed to deploy or undeploy servers, replicas and clients are part of the repository and placed in the playbooks folder. There are also playbooks to deploy and undeploy clusters. With them it is only needed to add an inventory file:
playbooks\
install-client.yml
install-cluster.yml
install-replica.yml
install-server.yml
uninstall-client.yml
uninstall-cluster.yml
uninstall-replica.yml
uninstall-server.yml
ansible-playbook -v -i inventory/hosts install-server.yml
This will deploy the master server defined in the inventory file.
If Ansible Vault is used for passwords, then it is needed to adapt the playbooks in this way:
---
- name: Playbook to configure IPA servers
hosts: ipaserver
become: true
vars_files:
- playbook_sensitive_data.yml
roles:
- role: ipaserver
state: present
It is also needed to provide the vault password file on the ansible-playbook command line:
ansible-playbook -v -i inventory/hosts --vault-password-file .vaul_pass.txt install-server.yml
ansible-playbook -v -i inventory/hosts install-replica.yml
This will deploy the replicas defined in the inventory file.
ansible-playbook -v -i inventory/hosts install-client.yml
This will deploy the clients defined in the inventory file.
ansible-playbook -v -i inventory/hosts install-cluster.yml
This will deploy the server, replicas and clients defined in the inventory file.
- ipaautomember
- ipaautomountkey
- ipaautomountlocation
- ipaautomountmap
- ipacert
- ipaconfig
- ipadelegation
- ipadnsconfig
- ipadnsforwardzone
- ipadnsrecord
- ipadnszone
- ipagroup
- ipahbacrule
- ipahbacsvc
- ipahbacsvcgroup
- ipahost
- ipahostgroup
- idoverridegroup
- idoverrideuser
- idp
- idrange
- idview
- ipalocation
- ipanetgroup
- ipapermission
- ipaprivilege
- ipapwpolicy
- iparole
- ipaselfservice
- ipaserver
- ipaservice
- ipaservicedelegationrule
- ipaservicedelegationtarget
- ipasudocmd
- ipasudocmdgroup
- ipasudorule
- ipatopologysegment
- ipatopologysuffix
- ipatrust
- ipauser
- ipavault
If you want to write a new module please read writing a new module.