Error: buildah exited with code 1 Resolved "fedora" as an alias (/etc/containers/registries.conf.d/shortnames.conf) Trying to pull registry.fedoraproject.org/fedora:40... Getting image source signatures Copying blob sha256:37f5389f058db1a47b139fc586ba3ac76ceb775dccb74a8178855c93d1ac456b Copying blob sha256:37f5389f058db1a47b139fc586ba3ac76ceb775dccb74a8178855c93d1ac456b Copying config sha256:73ba77cc641e2920aa7060676e25937573313e8c66d911fdfc6b73546773996e Writing manifest to image destination Storing signatures Enabling a Copr repository. Please note that this repository is not part of the main distribution, and quality may vary. The Fedora Project does not exercise any power over the contents of this repository beyond the rules outlined in the Copr FAQ at <https://docs.pagure.org/copr.copr/user_documentation.html#what-i-can-build-in-copr>, and packages are not held to any quality or security level. Please do not file bug reports about these packages in Fedora Bugzilla. In case of problems, contact the owner of this repository. Importing GPG key 0xEC5EA8BC: Userid : "rpmsoftwaremanagement_dnf5-testing (None) <rpmsoftwaremanagement#[email protected]>" Fingerprint: 6E22 2CB2 8D7B 0208 34DF 9302 106F 0C2F EC5E A8BC From : https://download.copr.fedorainfracloud.org/results/rpmsoftwaremanagement/dnf5-testing/pubkey.gpg Error: Transaction test error: file /etc/dnf/dnf.conf from install of libdnf5-5.2.7.0-2.fc40.x86_64 conflicts with file from package dnf-data-4.21.1-1.fc40.noarch error building at STEP "RUN dnf -y update && dnf -y install 'dnf-command(copr)' && if [ "$NAME" == "dnf5-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/dnf-nightly ; fi && if [ "$NAME" == "dnf5-testing" ] || [ "$NAME" == "dnf5-testing-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/"$NAME" ; fi && dnf -y install dnf5 dnf-data dnf5-plugins && dnf4 -y remove 'dnf-command(copr)' && dnf4 clean all && dnf5 clean all": error while running runtime: exit status 1 time="2024-11-26T04:23:22Z" level=error msg="exit status 1"

Error: buildah exited with code 1 Resolved "fedora" as an alias (/etc/containers/registries.conf.d/shortnames.conf) Trying to pull registry.fedoraproject.org/fedora:40... Getting image source signatures Copying blob sha256:37f5389f058db1a47b139fc586ba3ac76ceb775dccb74a8178855c93d1ac456b Copying blob sha256:37f5389f058db1a47b139fc586ba3ac76ceb775dccb74a8178855c93d1ac456b Copying config sha256:73ba77cc641e2920aa7060676e25937573313e8c66d911fdfc6b73546773996e Writing manifest to image destination Storing signatures Enabling a Copr repository. Please note that this repository is not part of the main distribution, and quality may vary. The Fedora Project does not exercise any power over the contents of this repository beyond the rules outlined in the Copr FAQ at <https://docs.pagure.org/copr.copr/user_documentation.html#what-i-can-build-in-copr>, and packages are not held to any quality or security level. Please do not file bug reports about these packages in Fedora Bugzilla. In case of problems, contact the owner of this repository. Importing GPG key 0x32E1BB04: Userid : "rpmsoftwaremanagement_dnf5-testing-nightly (None) <rpmsoftwaremanagement#[email protected]>" Fingerprint: 832D 5C93 5FA1 68DD 04FA C350 7027 B99C 32E1 BB04 From : https://download.copr.fedorainfracloud.org/results/rpmsoftwaremanagement/dnf5-testing-nightly/pubkey.gpg Error: Transaction test error: file /etc/dnf/dnf.conf from install of libdnf5-5.2.7.0-20241126010651.25.g341a75e0.fc40.x86_64 conflicts with file from package dnf-data-4.21.1-1.fc40.noarch error building at STEP "RUN dnf -y update && dnf -y install 'dnf-command(copr)' && if [ "$NAME" == "dnf5-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/dnf-nightly ; fi && if [ "$NAME" == "dnf5-testing" ] || [ "$NAME" == "dnf5-testing-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/"$NAME" ; fi && dnf -y install dnf5 dnf-data dnf5-plugins && dnf4 -y remove 'dnf-command(copr)' && dnf4 clean all && dnf5 clean all": error while running runtime: exit status 1 time="2024-11-26T04:23:36Z" level=error msg="exit status 1"

Error: buildah exited with code 1 Resolved "fedora" as an alias (/etc/containers/registries.conf.d/shortnames.conf) Trying to pull registry.fedoraproject.org/fedora:39... Getting image source signatures Copying blob sha256:acf55b33aede135c221dd82646c4ba897d65876609c58e288fdd3e37a5b6658f Copying blob sha256:acf55b33aede135c221dd82646c4ba897d65876609c58e288fdd3e37a5b6658f Copying config sha256:7eedfe589dd5a4cffa75005f3087c5cb7174f309715340c6f15dca5469d3f404 Writing manifest to image destination Storing signatures Enabling a Copr repository. Please note that this repository is not part of the main distribution, and quality may vary. The Fedora Project does not exercise any power over the contents of this repository beyond the rules outlined in the Copr FAQ at <https://docs.pagure.org/copr.copr/user_documentation.html#what-i-can-build-in-copr>, and packages are not held to any quality or security level. Please do not file bug reports about these packages in Fedora Bugzilla. In case of problems, contact the owner of this repository. Importing GPG key 0xEC5EA8BC: Userid : "rpmsoftwaremanagement_dnf5-testing (None) <rpmsoftwaremanagement#[email protected]>" Fingerprint: 6E22 2CB2 8D7B 0208 34DF 9302 106F 0C2F EC5E A8BC From : https://download.copr.fedorainfracloud.org/results/rpmsoftwaremanagement/dnf5-testing/pubkey.gpg Error: Transaction test error: file /etc/dnf/dnf.conf from install of libdnf5-5.2.7.0-2.fc39.x86_64 conflicts with file from package dnf-data-4.21.1-1.fc39.noarch error building at STEP "RUN dnf -y update && dnf -y install 'dnf-command(copr)' && if [ "$NAME" == "dnf5-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/dnf-nightly ; fi && if [ "$NAME" == "dnf5-testing" ] || [ "$NAME" == "dnf5-testing-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/"$NAME" ; fi && dnf -y install dnf5 dnf-data dnf5-plugins && dnf4 -y remove 'dnf-command(copr)' && dnf4 clean all && dnf5 clean all": error while running runtime: exit status 1 time="2024-11-26T04:23:48Z" level=error msg="exit status 1"

Error: buildah exited with code 1 Resolved "fedora" as an alias (/etc/containers/registries.conf.d/shortnames.conf) Trying to pull registry.fedoraproject.org/fedora:38... Getting image source signatures Copying blob sha256:95fe7b64e419f415e8175e1a4f65b41ddb69fdb5c5730a26abd9ffd4a50a1281 Copying blob sha256:95fe7b64e419f415e8175e1a4f65b41ddb69fdb5c5730a26abd9ffd4a50a1281 Copying config sha256:3eda970c1318e5ea564134338746c04d86ae9817c3a0defdc138b8ccdf787285 Writing manifest to image destination Storing signatures Enabling a Copr repository. Please note that this repository is not part of the main distribution, and quality may vary. The Fedora Project does not exercise any power over the contents of this repository beyond the rules outlined in the Copr FAQ at <https://docs.pagure.org/copr.copr/user_documentation.html#what-i-can-build-in-copr>, and packages are not held to any quality or security level. Please do not file bug reports about these packages in Fedora Bugzilla. In case of problems, contact the owner of this repository. Error: It wasn't possible to enable this project. Repository 'fedora-38-x86_64' does not exist in project 'rpmsoftwaremanagement/dnf-nightly'. Available repositories: 'centos-stream-9-x86_64', 'fedora-39-aarch64', 'fedora-rawhide-ppc64le', 'fedora-41-aarch64', 'fedora-39-x86_64', 'fedora-eln-ppc64le', 'fedora-rawhide-s390x', 'fedora-39-s390x', 'fedora-eln-i386', 'fedora-41-ppc64le', 'fedora-41-s390x', 'fedora-eln-aarch64', 'fedora-41-x86_64', 'epel-9-x86_64', 'fedora-eln-s390x', 'fedora-eln-x86_64', 'fedora-rawhide-aarch64', 'fedora-40-aarch64', 'fedora-40-s390x', 'fedora-39-ppc64le', 'fedora-40-ppc64le', 'fedora-rawhide-x86_64', 'fedora-40-x86_64' If you want to enable a non-default repository, use the following command: 'dnf copr enable rpmsoftwaremanagement/dnf-nightly <repository>' But note that the installed repo file will likely need a manual modification. error building at STEP "RUN dnf -y update && dnf -y install 'dnf-command(copr)' && if [ "$NAME" == "dnf5-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/dnf-nightly ; fi && if [ "$NAME" == "dnf5-testing" ] || [ "$NAME" == "dnf5-testing-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/"$NAME" ; fi && dnf -y install dnf5 dnf-data dnf5-plugins && dnf4 -y remove 'dnf-command(copr)' && dnf4 clean all && dnf5 clean all": error while running runtime: exit status 1 time="2024-11-26T04:23:48Z" level=error msg="exit status 1"

Error: buildah exited with code 1 Resolved "fedora" as an alias (/etc/containers/registries.conf.d/shortnames.conf) Trying to pull registry.fedoraproject.org/fedora:38... Getting image source signatures Copying blob sha256:95fe7b64e419f415e8175e1a4f65b41ddb69fdb5c5730a26abd9ffd4a50a1281 Copying blob sha256:95fe7b64e419f415e8175e1a4f65b41ddb69fdb5c5730a26abd9ffd4a50a1281 Copying config sha256:3eda970c1318e5ea564134338746c04d86ae9817c3a0defdc138b8ccdf787285 Writing manifest to image destination Storing signatures Enabling a Copr repository. Please note that this repository is not part of the main distribution, and quality may vary. The Fedora Project does not exercise any power over the contents of this repository beyond the rules outlined in the Copr FAQ at <https://docs.pagure.org/copr.copr/user_documentation.html#what-i-can-build-in-copr>, and packages are not held to any quality or security level. Please do not file bug reports about these packages in Fedora Bugzilla. In case of problems, contact the owner of this repository. Error: It wasn't possible to enable this project. Repository 'fedora-38-x86_64' does not exist in project 'rpmsoftwaremanagement/dnf5-testing-nightly'. Available repositories: 'fedora-eln-x86_64', 'fedora-rawhide-aarch64', 'fedora-40-s390x', 'fedora-eln-s390x', 'fedora-39-x86_64', 'fedora-41-s390x', 'fedora-40-aarch64', 'fedora-39-aarch64', 'fedora-41-x86_64', 'fedora-41-aarch64', 'fedora-rawhide-s390x', 'fedora-eln-aarch64', 'fedora-eln-ppc64le', 'fedora-40-x86_64', 'fedora-40-ppc64le', 'fedora-rawhide-x86_64', 'fedora-39-s390x', 'fedora-41-ppc64le', 'fedora-39-ppc64le', 'fedora-rawhide-ppc64le' If you want to enable a non-default repository, use the following command: 'dnf copr enable rpmsoftwaremanagement/dnf5-testing-nightly <repository>' But note that the installed repo file will likely need a manual modification. error building at STEP "RUN dnf -y update && dnf -y install 'dnf-command(copr)' && if [ "$NAME" == "dnf5-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/dnf-nightly ; fi && if [ "$NAME" == "dnf5-testing" ] || [ "$NAME" == "dnf5-testing-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/"$NAME" ; fi && dnf -y install dnf5 dnf-data dnf5-plugins && dnf4 -y remove 'dnf-command(copr)' && dnf4 clean all && dnf5 clean all": error while running runtime: exit status 1 time="2024-11-26T04:23:51Z" level=error msg="exit status 1"

Error: buildah exited with code 1 Resolved "fedora" as an alias (/etc/containers/registries.conf.d/shortnames.conf) Trying to pull registry.fedoraproject.org/fedora:38... Getting image source signatures Copying blob sha256:95fe7b64e419f415e8175e1a4f65b41ddb69fdb5c5730a26abd9ffd4a50a1281 Copying blob sha256:95fe7b64e419f415e8175e1a4f65b41ddb69fdb5c5730a26abd9ffd4a50a1281 Copying config sha256:3eda970c1318e5ea564134338746c04d86ae9817c3a0defdc138b8ccdf787285 Writing manifest to image destination Storing signatures Enabling a Copr repository. Please note that this repository is not part of the main distribution, and quality may vary. The Fedora Project does not exercise any power over the contents of this repository beyond the rules outlined in the Copr FAQ at <https://docs.pagure.org/copr.copr/user_documentation.html#what-i-can-build-in-copr>, and packages are not held to any quality or security level. Please do not file bug reports about these packages in Fedora Bugzilla. In case of problems, contact the owner of this repository. Error: It wasn't possible to enable this project. Repository 'fedora-38-x86_64' does not exist in project 'rpmsoftwaremanagement/dnf5-testing'. Available repositories: 'fedora-40-aarch64', 'fedora-rawhide-s390x', 'fedora-rawhide-ppc64le', 'fedora-40-s390x', 'fedora-rawhide-aarch64', 'fedora-41-ppc64le', 'fedora-rawhide-x86_64', 'fedora-39-ppc64le', 'fedora-41-s390x', 'fedora-41-x86_64', 'fedora-39-aarch64', 'fedora-40-x86_64', 'fedora-39-s390x', 'fedora-39-x86_64', 'fedora-41-aarch64', 'fedora-40-ppc64le' If you want to enable a non-default repository, use the following command: 'dnf copr enable rpmsoftwaremanagement/dnf5-testing <repository>' But note that the installed repo file will likely need a manual modification. error building at STEP "RUN dnf -y update && dnf -y install 'dnf-command(copr)' && if [ "$NAME" == "dnf5-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/dnf-nightly ; fi && if [ "$NAME" == "dnf5-testing" ] || [ "$NAME" == "dnf5-testing-nightly" ]; then dnf copr -y enable rpmsoftwaremanagement/"$NAME" ; fi && dnf -y install dnf5 dnf-data dnf5-plugins && dnf4 -y remove 'dnf-command(copr)' && dnf4 clean all && dnf5 clean all": error while running runtime: exit status 1 time="2024-11-26T04:23:58Z" level=error msg="exit status 1"