MMM-Tools

Dsiplay stats and remote controlling MagicMirror on SBC(ATB & RPI), MMM-TelegramBot supported.

Screenshots

on MagicMirror

on Telegram

Feature

• Display system status on MagicMirror
• MMM-TelegramBot commands, /status and /screen on|off are supported.
• You can set alert threshold for abnormal status of MagicMirror. You can get warning message by notification and TelegramBot

new Updates

2019-01-13

• Voice warning alert be enabled with MMM-AssistantMk2

warning_text: {
  CPU_TEMPERATURE : "The temperature of CPU is over %VAL%",
  GPU_TEMPERATURE : "The temperature of GPU is over %VAL%",
  CPU_USAGE : "The usage of CPU is over %VAL%",
  STORAGE_USED_PERCENT : "The storage is used over %VAL% percent",
  MEMORY_USED_PERCENT : "The memory is used over %VAL% percent",
}

//%VAL% will be replace with current value of system.

It's better to use with noChimeOnSay: true of MMM-AssistantMk2

Install

cd [YourMagicMirrorDirectory]/modules
git clone https://github.com/eouia/MMM-Tools

If you want to use screen capture function, you should install scrot additionally.

sudo apt-get install scrot

Configuration

{
  module: 'MMM-Tools',
  position: 'bottom_right',
  config: {
    device : "ATB", // "RPI" is also available
    refresh_interval_ms : 10000,
    warning_interval_ms : 1000 * 60 * 5,
    enable_warning : true,
    warning : {
      CPU_TEMPERATURE : 65,
      GPU_TEMPERATURE : 65,
      CPU_USAGE : 75,
      STORAGE_USED_PERCENT : 80,
      MEMORY_USED_PERCENT : 80
    },
    warning_text: {
      CPU_TEMPERATURE : "The temperature of CPU is over %VAL%",
      GPU_TEMPERATURE : "The temperature of GPU is over %VAL%",
      CPU_USAGE : "The usage of CPU is over %VAL%",
      STORAGE_USED_PERCENT : "The storage is used over %VAL% percent",
      MEMORY_USED_PERCENT : "The memory is used over %VAL% percent",
    }
  }
}
// For more detailed information, see below;

Detailed Configuration

field	default	description
device	"ATB"	"ATB" for Asus TinkerBoard (TinkerOS), "RPI" for Raspberry Pi (Raspbian).
refresh_interval_ms	10000	Milliseconds for refreshing status informaion on MagicMirror
warning_interval_ms	300000	Milliseconds for preventing multiple warning message. After passing this duration from previous warning messages, same warning message will be sent.
enable_warning	true	Set for sending warning message (notification and TelegramBot message)
warning	See the below	Threshold values for warning message

warning

fields	default	description
CPU_TEMPERATURE	65	Set CPU or SoC temperature for warning
GPU_TEMPERATURE	65	Set GPU temperature for warning
CPU_USAGE	75	Set % of CPU Usage (ref. /proc/stat) for warning
STORAGE_USED_PERCENT	80	Set % of used space of storage(SD Card) for warning
MEMORY_USED_PERCENT	80	Set % of used space of memory(RAM) for warning

Commands (For MMM-TelegramBot)

command	description
/status	Show system status
/screen on	Turn display on
/screen off	Turn display off
/capture	Get current MagicMirror screenshot

Customizing view

You can customize view of this module with CSS. See the MMM-Tools.css

 .Tools .status_item.status_ip {
   order: 1; // change order
   /* display : none; */ //set display
 }

For Asus Tinker Board user

• on current TinkerOs (v 1.9), there is no vgcencmd, vbetool, tvservice or equivalents. So I should use xset for controlling screen.
• First you should set your xset dpms and screensaver on boot like this.

xset s noblank
xset s off
xset -dpms

xset s 0 0
xset dpms 0 0 0

There is no /boot/config.text in TinkerOS unlike Raspbian. I use Xfce Power Manager on TinkerOS LXDE desktop. (Preference > Power Manager menu) Set Blank after and Put to sleep after and Switch off after by Never. It works.

• If you have any good idea for controling screen, please tell me.

For Raspberry Pi(Raspbian) user

• Don't forget setting device:"RPI", in config.js
• I have no RPI currently, so I cannot test enough. Please test and report issue for this module.
• I'm not an expert as SysAdmin, thus I don't know the best way to detect and control screen on Raspberry Pi.
• I don't know how to detect monitor status without xset q on RPI. I need your help.

Old Updates

2017-10-16

• Indonesian translations added (Thanks to @slametps)
• some bugs fixed.

2017-09-01

• Some bugs are fixed
• /capture command is added.