NetProbe is a tool you can use to scan for devices on your network. The program sends ARP requests to any IP address on your network and lists the IP addresses, MAC addresses, manufacturers, and device models of the responding devices.
- Scan for devices on a specified IP address or subnet
- Display the IP address, MAC address, manufacturer, and device model of discovered devices
- Live tracking of devices (optional)
- Save scan results to a file (optional)
- Filter by manufacturer (e.g., 'Apple') (optional)
- Filter by IP range (e.g., '192.168.1.0/24') (optional)
- Scan rate in seconds (default: 5) (optional)
You can download the program from the GitHub page.
$ git clone https://github.com/HalilDeniz/NetProbe.gitTo install the required libraries, run the following command:
$ pip install -r requirements.txtTo run the program, use the following command:
$ python3 netprobe.py [-h] -t [...] -i [...] [-l] [-o] [-m] [-r] [-s]-h,--help: show this help message and exit-t,--target: Target IP address or subnet (default: 192.168.1.0/24)-i,--interface: Interface to use (default: None)-l,--live: Enable live tracking of devices-o,--output: Output file to save the results-m,--manufacturer: Filter by manufacturer (e.g., 'Apple')-r,--ip-range: Filter by IP range (e.g., '192.168.1.0/24')-s,--scan-rate: Scan rate in seconds (default: 5)
$ python3 netprobe.py -t 192.168.1.0/24 -i eth0 -o results.txt -l$ python3 netprobe.py --help
usage: netprobe.py [-h] -t [...] -i [...] [-l] [-o] [-m] [-r] [-s]
NetProbe: Network Scanner Tool
options:
-h, --help show this help message and exit
-t [ ...], --target [ ...]
Target IP address or subnet (default: 192.168.1.0/24)
-i [ ...], --interface [ ...]
Interface to use (default: None)
-l, --live Enable live tracking of devices
-o , --output Output file to save the results
-m , --manufacturer Filter by manufacturer (e.g., 'Apple')
-r , --ip-range Filter by IP range (e.g., '192.168.1.0/24')
-s , --scan-rate Scan rate in seconds (default: 5)
$ python3 netprobe.py You can enable live tracking of devices on your network by using the -l or --live flag. This will continuously update the device list every 5 seconds.
$ python3 netprobe.py -t 192.168.1.0/24 -i eth0 -lYou can save the scan results to a file by using the -o or --output flag followed by the desired output file name.
$ python3 netprobe.py -t 192.168.1.0/24 -i eth0 -l -o results.txt
┏━━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━┳━━━━━━━━━━━━━┳━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓
┃ IP Address ┃ MAC Address ┃ Packet Size ┃ Manufacturer ┃
┡━━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━╇━━━━━━━━━━━━━╇━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┩
│ 192.168.1.1 │ **:6e:**:97:**:28 │ 102 │ ASUSTek COMPUTER INC. │
│ 192.168.1.3 │ 00:**:22:**:12:** │ 102 │ InPro Comm │
│ 192.168.1.2 │ **:32:**:bf:**:00 │ 102 │ Xiaomi Communications Co Ltd │
│ 192.168.1.98 │ d4:**:64:**:5c:** │ 102 │ ASUSTek COMPUTER INC. │
│ 192.168.1.25 │ **:49:**:00:**:38 │ 102 │ Unknown │
└──────────────┴───────────────────┴─────────────┴──────────────────────────────┘If you have any questions, suggestions, or feedback about the program, please feel free to reach out to me through any of the following platforms:
- Mywebsite: Denizhalil
- LinkedIn: LinkedIn
- TryHackMe: TryHackMe
- Instagram: Instagram
- YouTube: YouTube
- Email: [email protected]
This program is released under the MIT LICENSE. See LICENSE for more information.
Thank you for considering supporting me! Your support enables me to dedicate more time and effort to creating useful tools like DNSWatch and developing new projects. By contributing, you're not only helping me improve existing tools but also inspiring new ideas and innovations. Your support plays a vital role in the growth of this project and future endeavors. Together, let's continue building and learning. Thank you!"
