fuse-online-install

Installation

You can directly install from this repository for a specific fuse-online version. Installation is performed with install_ocp.sh. This script can be downloaded or executed directly from a cloned git repository:

# or git clone the repository and switch to tag 1.12
$ git clone https://github.com/syndesisio/fuse-online-install
$ cd fuse-online-install
$ git checkout 1.12

Installation of Fuse Online consists of three steps:

1. You need setup authentication for registry.redhat.io. Fuse Online requires a pull secret named syndesis-pull-secret to be present (See https://access.redhat.com/RegistryAuthentication)

2. You have to register first a custom resource on cluster level and allow a user to install Syndesis in his project. You need cluster admin permissions for doing this.

3. Fuse Online itself is then installed in a third step, which is performed as a regular user.

Registry Authentication

The install script will create an image pull secret in order to access images in the Red Hat registry (registry.redhat.io). If the secret is present, this step is skipped.

One-off admin setup step

For the second step you have to be connected as a cluster admin to the OCP cluster where you want install Fuse Online into.

Verify that you are properly connected and can list custom resources

$ oc get crd

When this command works for you without error you can call install_ocp.sh to register the CRD on cluster level.

$ bash install_ocp.sh --setup

You can also grant permissions to a the user who will eventually install Fuse Online in his project. In order to allow user developer to install Fuse Online into the currently connect project use

$ bash install_ocp.sh --grant developer

(You can read the current project with oc project). However, if the user deletes this project and recreates it, or want to install Fuse Online into a different project use the following command to grant cluster wide usage:

$ bash install_ocp.sh --grant developer --cluster

You can also combine both calls to a single call

$ bash install_ocp.sh --setup --grant developer --cluster

These steps need to be performed only once. However, if you want to add additional users, just call --grant for each user to add.

Install Fuse Online

If this setup has been performed successfully, you can switch to admin user who you just have granted access (e.g. "developer" in the example above):

$ oc login -u developer

Then you can install Fuse Online with just

$ bash install_ocp.sh

You can use several options to tune the installation process. Call bash install_ocp.sh --help for all options possible:

$ bash install_ocp.sh --help

Fuse Online Installation Tool for OCP

Usage: install_ocp.sh [options]

with options:

-s  --setup                   Install CRDs clusterwide. Use --grant if you want a specific user to be
                              able to install Fuse Online. You have to run this option once as cluster admin.
-u  --grant <user>            Add permissions for the given user so that user can install the operator
                              in her projects. You have to run this as cluster-admin
    --cluster                 Add the permission for all projects in the cluster
                              (only when used together with --grant)
   --force                    Override an existing installation if present
-p --project <project>        Install into this project. The project will be deleted
                              if it already exists. By default, install into the current project (without deleting)
   --skip-pull-secret         Skip the creation of the pull-secret. By default, will create or replace the pull-secret.
-w --watch                    Wait until the installation has completed
-o --open                     Open Fuse Online after installation (implies --watch)
                              (version is optional)
   --help                     This help message
-v --verbose                  Verbose logging

You have to run `--setup --grant <user>` as a cluster-admin before you can install Fuse Online as a user.

When you call install_ocp.sh it will install Fuse Online in this current project. You can choose a different project with the option --project <project>. Please be aware that this project will be deleted if it already exists. Also, you must have used the option --cluster when you set up the CRDs.

Example

The simplest way to install Fuse Ignite with no log URL enabled is

# Install with no link to the runtime pod's log
$ bash install_ocp.sh

For recreating the current project:

$ bash install_ocp.sh --project $(oc project -q)

Update

For updating an existing installation you should use the script update_ocp.sh. This script know the following options (which you get with --help):

Fuse Online Update Tool for OCP

Usage: update_ocp.sh [options]

with options:

   --skip-pull-secret         Skip the creation of the pull-secret. By default, will create or replace the pull-secret.
   --version                  Print target version to update to and exit.
-v --verbose                  Verbose logging

To start the update, call it without any option. The installation will be updated to the version to which this update script belogns. Use --version to see what are you going to update to:

$ bash update_ocp.sh --version
Update to Fuse Online 1.12

syndesis-operator:  1.12.5

Release

This section describes the release process.

A release is performed with the included release.sh script.

All configuration is set in common_config.sh:

# Tag for release. Update this before running release.sh
TAG_FUSE_ONLINE_INSTALL=1.8.0

# Fuse minor version (update it manually)
TAG=1.8

# Common settings
CURRENT_OS=$(get_current_os)
BINARY_FILE_EXTENSION=$(get_executable_file_extension)
OC_MIN_VERSION=3.9.0

# Syndesis settings
SYNDESIS_VERSION=1.8.1-20190920
SYNDESIS_BINARY=syndesis
SYNDESIS_GIT_ORG=syndesisio
SYNDESIS_GIT_REPO=syndesis
SYNDESIS_DOWNLOAD_URL=https://github.com/${SYNDESIS_GIT_ORG}/${SYNDESIS_GIT_REPO}/releases/download/${SYNDESIS_VERSION}/syndesis-${SYNDESIS_VERSION}-${CURRENT_OS}-64bit.tgz

When the config file is setup, a release is performed by simply calling bash release.sh. Some options are available, see below for which one.

The release process will perform the following steps (the variables are taken from common_config.sh):

• Commit everything
• Git tag with $TAG_FUSE_ONLINE_INSTALL
• Create a moving tag corresponding to the $TAG variable
• Git push if --git-push is given

The script understands some additional options:

Release tool for fuse-online OCP

Usage: bash release.sh [options]

with options:

--help                       This help message
--git-push                   Push to git directly
--verbose                    Verbose log output

Please check also "common_config.sh" for the configuration values.

Importing images

You can easily import images from one registry to an OpenShift internal registry, where these images then appear as Imagestreams in the project which is called like the image's repo.

You call e.g. with

cd utils
perl ./import_images.pl --registry docker.io --repo fuseignitetest

where --registry is the target registry an --repo is the repository part of the target image name (default: fuse-ignite)

This script will pick up the version numbers defined in fuse_online_config.sh and should be called right after a release from a release tag, e.g.

# Be sure to be oc-connected with the target OpenShift cluster
$ oc login ...

# Clone repo
$ git clone https://github.com/syndesisio/fuse-online-install.git
$ cd fuse-online-install

# Checkout tag
$ git checkout 1.8.0

# Login into the target registry for your docker daemon
$ docker login -u $(oc whoami) -p $(oc whoami -t) mytarget.registry.openshift.com

# Import images
$ cd utils
$ perl import_images.pl --registry mytarget.registry.openshift.com