ad9375: update test #72
GitHub Actions / Test Results
failed
Jul 17, 2024 in 0s
227 fail, 968 skipped, 357 pass in 18m 26s
Annotations
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_attr[tx_hardwaregain_chan0--41.95-0.0-0.05-0.05-adi.ad9371] (test.test_ad9371) failed
results.xml [took 6s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_attribute_single_value = <function attribute_single_value at 0x7fb349f943a0>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
attr = 'tx_hardwaregain_chan0', start = -41.95, stop = 0.0, step = 0.05
tol = 0.05
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize(
"attr, start, stop, step, tol",
[
("tx_hardwaregain_chan0", -41.95, 0.0, 0.05, 0.05),
("tx_hardwaregain_chan1", -41.95, 0.0, 0.05, 0.05),
("tx_lo", 70000000, 6000000000, 1000, 0),
("rx_lo", 70000000, 6000000000, 1000, 0),
],
)
def test_ad9371_attr(
test_attribute_single_value, iio_uri, classname, attr, start, stop, step, tol
):
> test_attribute_single_value(iio_uri, classname, attr, start, stop, step, tol)
test/test_ad9371.py:290:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/attr_tests.py:70: in attribute_single_value
assert dev_interface(uri, classname, val, attr, tol)
test/common.py:110: in dev_interface
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349e29a00>
event = <threading.Event object at 0x7fb349e299d0>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_attr[tx_hardwaregain_chan1--41.95-0.0-0.05-0.05-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_attribute_single_value = <function attribute_single_value at 0x7fb349f943a0>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
attr = 'tx_hardwaregain_chan1', start = -41.95, stop = 0.0, step = 0.05
tol = 0.05
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize(
"attr, start, stop, step, tol",
[
("tx_hardwaregain_chan0", -41.95, 0.0, 0.05, 0.05),
("tx_hardwaregain_chan1", -41.95, 0.0, 0.05, 0.05),
("tx_lo", 70000000, 6000000000, 1000, 0),
("rx_lo", 70000000, 6000000000, 1000, 0),
],
)
def test_ad9371_attr(
test_attribute_single_value, iio_uri, classname, attr, start, stop, step, tol
):
> test_attribute_single_value(iio_uri, classname, attr, start, stop, step, tol)
test/test_ad9371.py:290:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/attr_tests.py:70: in attribute_single_value
assert dev_interface(uri, classname, val, attr, tol)
test/common.py:110: in dev_interface
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349cb56a0>
event = <threading.Event object at 0x7fb349cb5340>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_attr[tx_lo-70000000-6000000000-1000-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_attribute_single_value = <function attribute_single_value at 0x7fb349f943a0>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371', attr = 'tx_lo'
start = 70000000, stop = 6000000000, step = 1000, tol = 0
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize(
"attr, start, stop, step, tol",
[
("tx_hardwaregain_chan0", -41.95, 0.0, 0.05, 0.05),
("tx_hardwaregain_chan1", -41.95, 0.0, 0.05, 0.05),
("tx_lo", 70000000, 6000000000, 1000, 0),
("rx_lo", 70000000, 6000000000, 1000, 0),
],
)
def test_ad9371_attr(
test_attribute_single_value, iio_uri, classname, attr, start, stop, step, tol
):
> test_attribute_single_value(iio_uri, classname, attr, start, stop, step, tol)
test/test_ad9371.py:290:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/attr_tests.py:70: in attribute_single_value
assert dev_interface(uri, classname, val, attr, tol)
test/common.py:110: in dev_interface
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349ababe0>
event = <threading.Event object at 0x7fb349aba700>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_attr[rx_lo-70000000-6000000000-1000-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_attribute_single_value = <function attribute_single_value at 0x7fb349f943a0>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371', attr = 'rx_lo'
start = 70000000, stop = 6000000000, step = 1000, tol = 0
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize(
"attr, start, stop, step, tol",
[
("tx_hardwaregain_chan0", -41.95, 0.0, 0.05, 0.05),
("tx_hardwaregain_chan1", -41.95, 0.0, 0.05, 0.05),
("tx_lo", 70000000, 6000000000, 1000, 0),
("rx_lo", 70000000, 6000000000, 1000, 0),
],
)
def test_ad9371_attr(
test_attribute_single_value, iio_uri, classname, attr, start, stop, step, tol
):
> test_attribute_single_value(iio_uri, classname, attr, start, stop, step, tol)
test/test_ad9371.py:290:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/attr_tests.py:70: in attribute_single_value
assert dev_interface(uri, classname, val, attr, tol)
test/common.py:110: in dev_interface
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349f6df40>
event = <threading.Event object at 0x7fb349f69370>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_rx_data[0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dma_rx = <function dma_rx at 0x7fb34a377dc0>, iio_uri = 'ip:10.1.0.120'
classname = 'adi.ad9371', channel = 0
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", range(2))
def test_ad9371_rx_data(test_dma_rx, iio_uri, classname, channel):
> test_dma_rx(iio_uri, classname, channel)
test/test_ad9371.py:298:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:49: in dma_rx
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349e8fa30>
event = <threading.Event object at 0x7fb349e5e430>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_rx_data[1-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dma_rx = <function dma_rx at 0x7fb34a377dc0>, iio_uri = 'ip:10.1.0.120'
classname = 'adi.ad9371', channel = 1
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", range(2))
def test_ad9371_rx_data(test_dma_rx, iio_uri, classname, channel):
> test_dma_rx(iio_uri, classname, channel)
test/test_ad9371.py:298:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:49: in dma_rx
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349d39af0>
event = <threading.Event object at 0x7fb349d39460>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set0-2000000-0.5--13-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'manual', 'rx_hardwaregain_chan0': 10, 'rx_hardwaregain_chan1': 10, ...}
channel = 0, frequency = 2000000, scale = 0.5, peak_min = -13
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb34987ba00>
event = <threading.Event object at 0x7fb349d9e3d0>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set0-2000000-0.5--13-1-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'manual', 'rx_hardwaregain_chan0': 10, 'rx_hardwaregain_chan1': 10, ...}
channel = 1, frequency = 2000000, scale = 0.5, peak_min = -13
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb3498ac9d0>
event = <threading.Event object at 0x7fb3498aceb0>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set1-2000000-0.12--25-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'manual', 'rx_hardwaregain_chan0': 10, 'rx_hardwaregain_chan1': 10, ...}
channel = 0, frequency = 2000000, scale = 0.12, peak_min = -25
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb34999a5b0>
event = <threading.Event object at 0x7fb34999a0a0>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set1-2000000-0.12--25-1-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'manual', 'rx_hardwaregain_chan0': 10, 'rx_hardwaregain_chan1': 10, ...}
channel = 1, frequency = 2000000, scale = 0.12, peak_min = -25
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349d4daf0>
event = <threading.Event object at 0x7fb349d4dc10>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set2-2000000-0.25--19-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'manual', 'rx_hardwaregain_chan0': 10, 'rx_hardwaregain_chan1': 10, ...}
channel = 0, frequency = 2000000, scale = 0.25, peak_min = -19
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb3499800a0>
event = <threading.Event object at 0x7fb349980c10>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set2-2000000-0.25--19-1-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'manual', 'rx_hardwaregain_chan0': 10, 'rx_hardwaregain_chan1': 10, ...}
channel = 1, frequency = 2000000, scale = 0.25, peak_min = -19
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349c9a3a0>
event = <threading.Event object at 0x7fb349c9af10>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set3-1000000-0.12--14.7-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 0s]
Raw output
paramiko.ssh_exception.SSHException: Error reading SSH protocol banner
self = <paramiko.Transport at 0x49c42970 (unconnected)>
def _check_banner(self):
# this is slow, but we only have to do it once
for i in range(100):
# give them 15 seconds for the first line, then just 2 seconds
# each additional line. (some sites have very high latency.)
if i == 0:
timeout = self.banner_timeout
else:
timeout = 2
try:
> buf = self.packetizer.readline(timeout)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:2327:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/packet.py:381: in readline
buf += self._read_timeout(timeout)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.packet.Packetizer object at 0x7fb349c42eb0>, timeout = 2
def _read_timeout(self, timeout):
start = time.time()
while True:
try:
x = self.__socket.recv(128)
if len(x) == 0:
> raise EOFError()
E EOFError
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/packet.py:618: EOFError
During handling of the above exception, another exception occurred:
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'automatic', 'rx_lo': 2500000000, 'rx_temp_comp_gain_chan0': 0, ...}
channel = 0, frequency = 1000000, scale = 0.12, peak_min = -14.7
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:451: in connect
t.start_client(timeout=timeout)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:738: in start_client
raise e
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:2143: in run
self._check_banner()
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.Transport at 0x49c42970 (unconnected)>
def _check_banner(self):
# this is slow, but we only have to do it once
for i in range(100):
# give them 15 seconds for the first line, then just 2 seconds
# each additional line. (some sites have very high latency.)
if i == 0:
timeout = self.banner_timeout
else:
timeout = 2
try:
buf = self.packetizer.readline(timeout)
except ProxyCommandFailure:
raise
except Exception as e:
> raise SSHException(
"Error reading SSH protocol banner" + str(e)
)
E paramiko.ssh_exception.SSHException: Error reading SSH protocol banner
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:2331: SSHException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set3-1000000-0.12--14.7-1-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'automatic', 'rx_lo': 2500000000, 'rx_temp_comp_gain_chan0': 0, ...}
channel = 1, frequency = 1000000, scale = 0.12, peak_min = -14.7
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb34999a430>
event = <threading.Event object at 0x7fb349d81460>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set4-2000000-0.12--14.7-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'automatic', 'rx_lo': 2500000000, 'rx_temp_comp_gain_chan0': 0, ...}
channel = 0, frequency = 2000000, scale = 0.12, peak_min = -14.7
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb3499f48e0>
event = <threading.Event object at 0x7fb3499f4880>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set4-2000000-0.12--14.7-1-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'automatic', 'rx_lo': 2500000000, 'rx_temp_comp_gain_chan0': 0, ...}
channel = 1, frequency = 2000000, scale = 0.12, peak_min = -14.7
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb3499a3130>
event = <threading.Event object at 0x7fb3499a3ca0>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set5-500000-0.12--14.7-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'automatic', 'rx_lo': 2500000000, 'rx_temp_comp_gain_chan0': 0, ...}
channel = 0, frequency = 500000, scale = 0.12, peak_min = -14.7
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb3496997c0>
event = <threading.Event object at 0x7fb349d0e970>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set5-500000-0.12--14.7-1-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'automatic', 'rx_lo': 2500000000, 'rx_temp_comp_gain_chan0': 0, ...}
channel = 1, frequency = 500000, scale = 0.12, peak_min = -14.7
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb34987be20>
event = <threading.Event object at 0x7fb34987b2b0>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set6-2000000-0.25--23.8-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'manual', 'rx_hardwaregain_chan0': 10, 'rx_hardwaregain_chan1': 10, ...}
channel = 0, frequency = 2000000, scale = 0.25, peak_min = -23.8
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349c4d940>
event = <threading.Event object at 0x7fb349c4d880>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set6-2000000-0.25--23.8-1-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'manual', 'rx_hardwaregain_chan0': 10, 'rx_hardwaregain_chan1': 10, ...}
channel = 1, frequency = 2000000, scale = 0.25, peak_min = -23.8
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349dbb0a0>
event = <threading.Event object at 0x7fb34987eca0>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set7-2000000-0.25--28.75-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'manual', 'rx_hardwaregain_chan0': 10, 'rx_hardwaregain_chan1': 10, ...}
channel = 0, frequency = 2000000, scale = 0.25, peak_min = -28.75
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349c0dfa0>
event = <threading.Event object at 0x7fb349c0dca0>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set7-2000000-0.25--28.75-1-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'manual', 'rx_hardwaregain_chan0': 10, 'rx_hardwaregain_chan1': 10, ...}
channel = 1, frequency = 2000000, scale = 0.25, peak_min = -28.75
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349e9ab50>
event = <threading.Event object at 0x7fb349e9a250>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set8-1000000-0.12--9-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'automatic', 'rx_lo': 2500000000, 'rx_temp_comp_gain_chan0': 0, ...}
channel = 0, frequency = 1000000, scale = 0.12, peak_min = -9
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb349853910>
event = <threading.Event object at 0x7fb349853100>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set8-1000000-0.12--9-1-adi.ad9371] (test.test_ad9371) failed
results.xml [took 3s]
Raw output
paramiko.ssh_exception.AuthenticationException: Authentication failed.
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'automatic', 'rx_lo': 2500000000, 'rx_temp_comp_gain_chan0': 0, ...}
channel = 1, frequency = 1000000, scale = 0.12, peak_min = -9
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:485: in connect
self._auth(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:818: in _auth
raise saved_exception
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:805: in _auth
self._transport.auth_password(username, password)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:1603: in auth_password
return self.auth_handler.wait_for_response(my_event)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.auth_handler.AuthHandler object at 0x7fb3499c5700>
event = <threading.Event object at 0x7fb3499c5b50>
def wait_for_response(self, event):
max_ts = None
if self.transport.auth_timeout is not None:
max_ts = time.time() + self.transport.auth_timeout
while True:
event.wait(0.1)
if not self.transport.is_active():
e = self.transport.get_exception()
if (e is None) or issubclass(e.__class__, EOFError):
e = AuthenticationException(
"Authentication failed: transport shut down or saw EOF"
)
raise e
if event.is_set():
break
if max_ts is not None and max_ts <= time.time():
raise AuthenticationException("Authentication timeout.")
if not self.is_authenticated():
e = self.transport.get_exception()
if e is None:
e = AuthenticationException("Authentication failed.")
# this is horrible. Python Exception isn't yet descended from
# object, so type(e) won't work. :(
# TODO 4.0: lol. just lmao.
if issubclass(e.__class__, PartialAuthentication):
return e.allowed_types
> raise e
E paramiko.ssh_exception.AuthenticationException: Authentication failed.
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/auth_handler.py:263: AuthenticationException
Check warning on line 0 in test.test_ad9371
github-actions / Test Results
test_ad9371_dds_loopback[param_set9-1000000-0.12--24.7-0-adi.ad9371] (test.test_ad9371) failed
results.xml [took 0s]
Raw output
paramiko.ssh_exception.SSHException: Error reading SSH protocol banner
self = <paramiko.Transport at 0x4864b6a0 (unconnected)>
def _check_banner(self):
# this is slow, but we only have to do it once
for i in range(100):
# give them 15 seconds for the first line, then just 2 seconds
# each additional line. (some sites have very high latency.)
if i == 0:
timeout = self.banner_timeout
else:
timeout = 2
try:
> buf = self.packetizer.readline(timeout)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:2327:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/packet.py:381: in readline
buf += self._read_timeout(timeout)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.packet.Packetizer object at 0x7fb34864b1f0>, timeout = 2
def _read_timeout(self, timeout):
start = time.time()
while True:
try:
x = self.__socket.recv(128)
if len(x) == 0:
> raise EOFError()
E EOFError
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/packet.py:618: EOFError
During handling of the above exception, another exception occurred:
test_dds_loopback = <function dds_loopback at 0x7fb354580f70>
iio_uri = 'ip:10.1.0.120', classname = 'adi.ad9371'
param_set = {'ensm_mode': 'radio_on', 'gain_control_mode': 'automatic', 'rx_lo': 2500000000, 'rx_temp_comp_gain_chan0': 0, ...}
channel = 0, frequency = 1000000, scale = 0.12, peak_min = -24.7
@pytest.mark.no_obs_required
@pytest.mark.iio_hardware(hardware)
@pytest.mark.parametrize("classname", [(classname)])
@pytest.mark.parametrize("channel", [0, 1])
@pytest.mark.parametrize(
"param_set, frequency, scale, peak_min",
[
(params["one_cw_tone_manual"], 2000000, 0.5, -13),
(params["one_cw_tone_manual"], 2000000, 0.12, -25),
(params["one_cw_tone_manual"], 2000000, 0.25, -19),
(params["one_cw_tone_auto"], 1000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 2000000, 0.12, -14.7),
(params["one_cw_tone_auto"], 500000, 0.12, -14.7),
(params["change_attenuation_5dB_manual"], 2000000, 0.25, -23.8),
(params["change_attenuation_10dB_manual"], 2000000, 0.25, -28.75),
(params["change_attenuation_0dB_auto"], 1000000, 0.12, -9),
(params["change_attenuation_20dB_auto"], 1000000, 0.12, -24.7),
(params["change_rf_gain_0dB_manual"], 2000000, 0.25, -29),
(params["change_rf_gain_20dB_manual"], 2000000, 0.25, -9),
(params["change_temp_gain_up"], 2000000, 0.25, -16),
(params["change_temp_gain_down"], 2000000, 0.25, -22),
],
)
def test_ad9371_dds_loopback(
test_dds_loopback,
iio_uri,
classname,
param_set,
channel,
frequency,
scale,
peak_min,
):
> test_dds_loopback(
iio_uri, classname, param_set, channel, frequency, scale, peak_min
)
test/test_ad9371.py:335:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
test/dma_tests.py:286: in dds_loopback
sdr = eval(classname + "(uri='" + uri + "')")
<string>:1: in <module>
???
adi/ad937x.py:40: in __init__
self._jesd = jesd(uri, username=username, password=password)
adi/jesd_internal.py:20: in __init__
self.fs = sshfs(address, username, password)
adi/sshfs.py:28: in __init__
self.ssh.connect(
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/client.py:451: in connect
t.start_client(timeout=timeout)
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:738: in start_client
raise e
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:2143: in run
self._check_banner()
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <paramiko.Transport at 0x4864b6a0 (unconnected)>
def _check_banner(self):
# this is slow, but we only have to do it once
for i in range(100):
# give them 15 seconds for the first line, then just 2 seconds
# each additional line. (some sites have very high latency.)
if i == 0:
timeout = self.banner_timeout
else:
timeout = 2
try:
buf = self.packetizer.readline(timeout)
except ProxyCommandFailure:
raise
except Exception as e:
> raise SSHException(
"Error reading SSH protocol banner" + str(e)
)
E paramiko.ssh_exception.SSHException: Error reading SSH protocol banner
/opt/hostedtoolcache/Python/3.8.18/x64/lib/python3.8/site-packages/paramiko/transport.py:2331: SSHException
Loading