chore: sync awf-latest

autoware_launch/config/localization/ar_tag_based_localizer.param.yaml

@@ -0,0 +1,40 @@
+/**:
+  ros__parameters:
+    # marker_size
+    marker_size: 0.6
+
+    # target_tag_ids
+    target_tag_ids: ['0','1','2','3','4','5','6']
+
+    # base_covariance
+    #   This value is dynamically scaled according to the distance at which AR tags are detected.
+    base_covariance: [0.2, 0.0, 0.0, 0.0,  0.0,  0.0,
+                      0.0, 0.2, 0.0, 0.0,  0.0,  0.0,
+                      0.0, 0.0, 0.2, 0.0,  0.0,  0.0,
+                      0.0, 0.0, 0.0, 0.02, 0.0,  0.0,
+                      0.0, 0.0, 0.0, 0.0,  0.02, 0.0,
+                      0.0, 0.0, 0.0, 0.0,  0.0,  0.02]
+
+    # Detect AR-Tags within this range and publish the pose of ego vehicle
+    distance_threshold: 13.0  # [m]
+
+    # consider_orientation
+    consider_orientation: false
+
+    # Detector parameters
+    # See https://github.com/pal-robotics/aruco_ros/blob/7787a6794d30c248bc546d1582e65dd47bc40c12/aruco/include/aruco/markerdetector.h#L106-L126
+    detection_mode: "DM_NORMAL"  # select from [DM_NORMAL, DM_FAST, DM_VIDEO_FAST]
+    min_marker_size: 0.02
+
+    # Parameters for comparison with EKF Pose
+    # If the difference between the EKF pose and the current pose is within the range of values set below, the current pose is published.
+    # [How to determine the value]
+    # * ekf_time_tolerance: Since it is abnormal if the data comes too old from EKF, the tentative tolerance value is set at 5 seconds.
+    #                       This value is assumed to be unaffected even if it is increased or decreased by some amount.
+    # * ekf_position_tolerance: Since it is possible that multiple AR tags with the same ID could be placed, the tolerance should be as small as possible.
+    #                           And if the vehicle is running only on odometry in a section without AR tags,
+    #                           it is possible that self-position estimation could be off by a few meters.
+    #                           it should be fixed by AR tag detection, so tolerance should not be smaller than 10 meters.
+    #                           Therefore, the tolerance is set at 10 meters.
+    ekf_time_tolerance: 5.0 # [s]
+    ekf_position_tolerance: 10.0 # [m]

autoware_launch/config/planning/scenario_planning/lane_driving/behavior_planning/behavior_path_planner/goal_planner/goal_planner.param.yaml

@@ -39,6 +39,9 @@
         object_recognition_collision_check_max_extra_stopping_margin: 1.0
         th_moving_object_velocity: 1.0
         detection_bound_offset: 15.0
+        outer_road_detection_offset: 1.0
+        inner_road_detection_offset: 0.0
+
 
       # pull over
       pull_over:

autoware_launch/config/planning/scenario_planning/lane_driving/behavior_planning/behavior_velocity_planner/crosswalk.param.yaml

@@ -41,7 +41,7 @@
         ego_pass_first_margin_y: [3.0] # [[s]] time to vehicle margin vector for ego pass first situation (the module judges that ego don't have to stop at TTC + MARGIN < TTV condition)
         ego_pass_first_additional_margin: 0.5 # [s] additional time margin for ego pass first situation to suppress chattering
         ego_pass_later_margin_x: [0.0] # [[s]] time to vehicle margin vector for object pass first situation (the module judges that ego don't have to stop at TTV + MARGIN < TTC condition)
-        ego_pass_later_margin_y: [10.0] # [[s]] time to collision margin vector for object pass first situation (the module judges that ego don't have to stop at TTV + MARGIN < TTC condition)
+        ego_pass_later_margin_y: [13.0] # [[s]] time to collision margin vector for object pass first situation (the module judges that ego don't have to stop at TTV + MARGIN < TTC condition)
         ego_pass_later_additional_margin: 0.5 # [s] additional time margin for object pass first situation to suppress chattering
 
         no_stop_decision: # parameters to determine if it is safe to attempt stopping before the crosswalk

autoware_launch/launch/components/tier4_localization_component.launch.xml

@@ -52,6 +52,9 @@
 
       <!-- parameter paths for eagleye -->
       <arg name="eagleye_param_path" value="$(find-pkg-share autoware_launch)/config/localization/eagleye_config.param.yaml"/>
+
+      <!-- parameter path for ar_tag_based_localizer -->
+      <arg name="ar_tag_based_localizer_param_path" value="$(var loc_config_path)/ar_tag_based_localizer.param.yaml"/>
     </include>
   </group>
 </launch>

autoware_launch/launch/planning_simulator.launch.xml

@@ -13,6 +13,8 @@
   <!-- Map -->
   <arg name="lanelet2_map_file" default="lanelet2_map.osm" description="lanelet2 map file name"/>
   <arg name="pointcloud_map_file" default="pointcloud_map.pcd" description="pointcloud map file name"/>
+  <let name="rviz_initial_pose_auto_fix_target" value="vector_map"/>
+  <let name="gnss_initial_pose_auto_fix_target" value="vector_map"/>
   <!-- System -->
   <arg name="launch_system_monitor" default="false" description="launch system monitor"/>
   <arg name="launch_dummy_diag_publisher" default="false" description="launch dummy diag publisher"/>