Python implementation of 1-Wire protocol.

Библиотеки для получения данных с различных сенсоров / Libraries for receiving data from various sensors

Support for Maxim's DS-Family of 1-Wire digital temperature sensors

Simple libraries for various sensors

Go implementation of 1-Wire protocol.

This is an example of connecting multiple ds18b20 sensors to wemos d1 r1 board and sending them through mqtt.

Heizungssteuerung

Battery powered moisture sensor based on ESP8266 controller which publishes readings via MQTT

Show/log temperature from DS1820 sensors connected to RaspberryPi

AVR DS18x20 temperature sensor driver

Family of FHEM modules to support the Esera 1-wire controller and various sensors and actors.

Raspberry Pi temp sensor

Funk-Temperatursensor mit maximal 8 Stueck 1-Wire-Sensoren

LCD Clock for HD44780 16x2 display over I²C by PCF8574 bus expander with 1-wire Thermal Sensor extension for DS1820

Exposes temperatures read via w1_therm linux kernel module from any 1-Wire bus for Prometheus consumption

A simple ds18b20 to usb tool using an esp32/arduino board

Ein Arduino basierter 433MHz Funkempfänger und Funksender zur Übertragung von Messwerten wie Temperatur, Regenmenge, Wasserverbrauch usw. Ein ESP8266 stellt dabei ein Gateway zwischen dem 433MH Funknetz und einem auf einem Raspberry Pi installiertem EmonEms zur Verfügung. Gleichzeitig läuft auf dem ESP8266 ein Webserver, damit die aktuellen Mess…

This is code for a ESP8266 with a ds18b20 temp probe sending data to a Influx database.

Reading data from the temperature sensor DS1820 and writing to MySql