Remove trailing semicolons in elixirs

examples/dgmulti_2d/elixir_navierstokes_lid_driven_cavity.jl

@@ -57,7 +57,7 @@ semi = SemidiscretizationHyperbolicParabolic(mesh, (equations, equations_parabol
 
 # Create ODE problem with time span `tspan`
 tspan = (0.0, 10.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 summary_callback = SummaryCallback()
 alive_callback = AliveCallback(alive_interval = 10)

examples/p4est_2d_dgsem/elixir_advection_basic.jl

@@ -31,7 +31,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_convergen
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/p4est_2d_dgsem/elixir_advection_diffusion_nonperiodic_curved.jl

@@ -68,7 +68,7 @@ semi = SemidiscretizationHyperbolicParabolic(mesh, (equations, equations_parabol
 
 # Create ODE problem with time span `tspan`
 tspan = (0.0, 1.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/p4est_2d_dgsem/elixir_advection_diffusion_periodic.jl

@@ -55,7 +55,7 @@ semi = SemidiscretizationHyperbolicParabolic(mesh,
 
 # Create ODE problem with time span `tspan`
 tspan = (0.0, 1.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/p4est_2d_dgsem/elixir_advection_diffusion_periodic_amr.jl

@@ -47,7 +47,7 @@ semi = SemidiscretizationHyperbolicParabolic(mesh,
 
 # Create ODE problem with time span `tspan`
 tspan = (0.0, 0.5)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/p4est_2d_dgsem/elixir_advection_diffusion_periodic_curved.jl

@@ -60,7 +60,7 @@ semi = SemidiscretizationHyperbolicParabolic(mesh,
 
 # Create ODE problem with time span `tspan`
 tspan = (0.0, 1.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/p4est_2d_dgsem/elixir_advection_extended.jl

@@ -40,7 +40,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 
 # Create ODE problem with time span from 0.0 to 1.0
 tspan = (0.0, 1.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/p4est_2d_dgsem/elixir_advection_nonconforming_flag.jl

@@ -52,7 +52,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_convergen
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 0.2
-ode = semidiscretize(semi, (0.0, 0.2));
+ode = semidiscretize(semi, (0.0, 0.2))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/p4est_2d_dgsem/elixir_advection_restart.jl

@@ -24,7 +24,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 
 tspan = (load_time(restart_filename), 2.0)
 dt = load_dt(restart_filename)
-ode = semidiscretize(semi, tspan, restart_filename);
+ode = semidiscretize(semi, tspan, restart_filename)
 
 # Do not overwrite the initial snapshot written by elixir_advection_extended.jl.
 save_solution.condition.save_initial_solution = false

examples/p4est_2d_dgsem/elixir_advection_restart_amr.jl

@@ -24,7 +24,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 
 tspan = (load_time(restart_filename), 2.0)
 dt = load_dt(restart_filename)
-ode = semidiscretize(semi, tspan, restart_filename);
+ode = semidiscretize(semi, tspan, restart_filename)
 
 # Do not overwrite the initial snapshot written by elixir_advection_extended.jl.
 save_solution.condition.save_initial_solution = false

examples/p4est_2d_dgsem/elixir_eulergravity_convergence.jl

@@ -50,7 +50,7 @@ semi = SemidiscretizationEulerGravity(semi_euler, semi_gravity, parameters)
 ###############################################################################
 # ODE solvers, callbacks etc.
 tspan = (0.0, 0.5)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 summary_callback = SummaryCallback()
 

examples/p4est_2d_dgsem/elixir_navierstokes_lid_driven_cavity.jl

@@ -61,7 +61,7 @@ semi = SemidiscretizationHyperbolicParabolic(mesh, (equations, equations_parabol
 
 # Create ODE problem with time span `tspan`
 tspan = (0.0, 25.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 summary_callback = SummaryCallback()
 alive_callback = AliveCallback(alive_interval = 100)

examples/p4est_2d_dgsem/elixir_navierstokes_lid_driven_cavity_amr.jl

@@ -61,7 +61,7 @@ semi = SemidiscretizationHyperbolicParabolic(mesh, (equations, equations_parabol
 
 # Create ODE problem with time span `tspan`
 tspan = (0.0, 25.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 summary_callback = SummaryCallback()
 alive_callback = AliveCallback(alive_interval = 2000)

examples/p4est_3d_dgsem/elixir_advection_restart.jl

@@ -22,7 +22,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_convergen
 
 tspan = (load_time(restart_filename), 2.0)
 dt = load_dt(restart_filename)
-ode = semidiscretize(semi, tspan, restart_filename);
+ode = semidiscretize(semi, tspan, restart_filename)
 
 # Do not overwrite the initial snapshot written by elixir_advection_extended.jl.
 save_solution.condition.save_initial_solution = false

examples/p4est_3d_dgsem/elixir_advection_unstructured_curved.jl

@@ -60,7 +60,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 0.1
-ode = semidiscretize(semi, (0.0, 0.1));
+ode = semidiscretize(semi, (0.0, 0.1))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/paper_self_gravitating_gas_dynamics/elixir_eulergravity_convergence.jl

@@ -48,7 +48,7 @@ semi = SemidiscretizationEulerGravity(semi_euler, semi_gravity, parameters)
 ###############################################################################
 # ODE solvers, callbacks etc.
 tspan = (0.0, 0.5)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 summary_callback = SummaryCallback()
 

examples/paper_self_gravitating_gas_dynamics/elixir_eulergravity_jeans_instability.jl

@@ -101,7 +101,7 @@ semi = SemidiscretizationEulerGravity(semi_euler, semi_gravity, parameters)
 ###############################################################################
 # ODE solvers, callbacks etc.
 tspan = (0.0, 5.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 summary_callback = SummaryCallback()
 

examples/paper_self_gravitating_gas_dynamics/elixir_eulergravity_sedov_blast_wave.jl

@@ -183,7 +183,7 @@ semi = SemidiscretizationEulerGravity(semi_euler, semi_gravity, parameters)
 ###############################################################################
 # ODE solvers, callbacks etc.
 tspan = (0.0, 1.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 summary_callback = SummaryCallback()
 

examples/paper_self_gravitating_gas_dynamics/elixir_hypdiff_convergence.jl

@@ -33,7 +33,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 # ODE solvers, callbacks etc.
 
 tspan = (0.0, 5.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 summary_callback = SummaryCallback()
 

examples/structured_1d_dgsem/elixir_advection_basic.jl

@@ -28,7 +28,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_convergen
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/structured_2d_dgsem/elixir_advection_basic.jl

@@ -29,7 +29,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_convergen
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/structured_2d_dgsem/elixir_advection_coupled.jl

@@ -181,7 +181,7 @@ semi = SemidiscretizationCoupled(semi1, semi2, semi3, semi4)
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 2.0
-ode = semidiscretize(semi, (0.0, 2.0));
+ode = semidiscretize(semi, (0.0, 2.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/structured_2d_dgsem/elixir_advection_extended.jl

@@ -38,7 +38,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 
 # Create ODE problem with time span from 0.0 to 1.0
 tspan = (0.0, 1.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/structured_2d_dgsem/elixir_advection_free_stream.jl

@@ -40,7 +40,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver)
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/structured_2d_dgsem/elixir_advection_meshview.jl

@@ -83,7 +83,7 @@ semi = SemidiscretizationCoupled(semi1, semi2)
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/structured_2d_dgsem/elixir_advection_parallelogram.jl

@@ -58,7 +58,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_parallelo
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/structured_2d_dgsem/elixir_advection_restart.jl

@@ -23,7 +23,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver)
 
 tspan = (load_time(restart_filename), 2.0)
 dt = load_dt(restart_filename)
-ode = semidiscretize(semi, tspan, restart_filename);
+ode = semidiscretize(semi, tspan, restart_filename)
 
 # Do not overwrite the initial snapshot written by elixir_advection_extended.jl.
 save_solution.condition.save_initial_solution = false

examples/structured_2d_dgsem/elixir_advection_rotated.jl

@@ -86,7 +86,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver)
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/structured_2d_dgsem/elixir_advection_waving_flag.jl

@@ -32,7 +32,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver)
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/structured_2d_dgsem/elixir_hypdiff_harmonic_nonperiodic.jl

@@ -48,7 +48,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 # ODE solvers, callbacks etc.
 
 tspan = (0.0, 5.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 summary_callback = SummaryCallback()
 

examples/structured_2d_dgsem/elixir_hypdiff_nonperiodic.jl

@@ -46,7 +46,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 # ODE solvers, callbacks etc.
 
 tspan = (0.0, 30.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 summary_callback = SummaryCallback()
 

examples/structured_3d_dgsem/elixir_advection_basic.jl

@@ -28,7 +28,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_convergen
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/structured_3d_dgsem/elixir_advection_free_stream.jl

@@ -48,7 +48,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_constant,
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/structured_3d_dgsem/elixir_advection_restart.jl

@@ -22,7 +22,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_convergen
 
 tspan = (load_time(restart_filename), 2.0)
 dt = load_dt(restart_filename)
-ode = semidiscretize(semi, tspan, restart_filename);
+ode = semidiscretize(semi, tspan, restart_filename)
 
 # Do not overwrite the initial snapshot written by elixir_advection_extended.jl.
 save_solution.condition.save_initial_solution = false

examples/t8code_2d_dgsem/elixir_advection_basic.jl

@@ -30,7 +30,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_convergen
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/t8code_2d_dgsem/elixir_advection_extended.jl

@@ -40,7 +40,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 
 # Create ODE problem with time span from 0.0 to 1.0
 tspan = (0.0, 1.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/t8code_2d_dgsem/elixir_advection_nonconforming_flag.jl

@@ -60,7 +60,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_convergen
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 0.2
-ode = semidiscretize(semi, (0.0, 0.2));
+ode = semidiscretize(semi, (0.0, 0.2))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/t8code_2d_dgsem/elixir_advection_restart.jl

@@ -24,7 +24,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 
 tspan = (load_time(restart_filename), 2.0)
 dt = load_dt(restart_filename)
-ode = semidiscretize(semi, tspan, restart_filename);
+ode = semidiscretize(semi, tspan, restart_filename)
 
 # Do not overwrite the initial snapshot written by elixir_advection_extended.jl.
 save_solution.condition.save_initial_solution = false

examples/t8code_2d_dgsem/elixir_advection_restart_amr.jl

@@ -24,7 +24,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 
 tspan = (load_time(restart_filename), 2.0)
 dt = load_dt(restart_filename)
-ode = semidiscretize(semi, tspan, restart_filename);
+ode = semidiscretize(semi, tspan, restart_filename)
 
 # Do not overwrite the initial snapshot written by elixir_advection_extended.jl.
 save_solution.condition.save_initial_solution = false

examples/t8code_2d_dgsem/elixir_eulergravity_convergence.jl

@@ -50,7 +50,7 @@ semi = SemidiscretizationEulerGravity(semi_euler, semi_gravity, parameters)
 ###############################################################################
 # ODE solvers, callbacks etc.
 tspan = (0.0, 0.5)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 summary_callback = SummaryCallback()
 

examples/t8code_3d_dgsem/elixir_advection_restart.jl

@@ -21,7 +21,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_convergen
 
 tspan = (load_time(restart_filename), 2.0)
 dt = load_dt(restart_filename)
-ode = semidiscretize(semi, tspan, restart_filename);
+ode = semidiscretize(semi, tspan, restart_filename)
 
 # Do not overwrite the initial snapshot written by elixir_advection_extended.jl.
 save_solution.condition.save_initial_solution = false

examples/t8code_3d_dgsem/elixir_advection_unstructured_curved.jl

@@ -59,7 +59,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition, solver,
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 0.1
-ode = semidiscretize(semi, (0.0, 0.1));
+ode = semidiscretize(semi, (0.0, 0.1))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/tree_1d_dgsem/elixir_advection_basic.jl

@@ -27,7 +27,7 @@ semi = SemidiscretizationHyperbolic(mesh, equations, initial_condition_convergen
 # ODE solvers, callbacks etc.
 
 # Create ODE problem with time span from 0.0 to 1.0
-ode = semidiscretize(semi, (0.0, 1.0));
+ode = semidiscretize(semi, (0.0, 1.0))
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers

examples/tree_1d_dgsem/elixir_advection_diffusion.jl

@@ -63,7 +63,7 @@ semi = SemidiscretizationHyperbolicParabolic(mesh, (equations, equations_parabol
 
 # Create ODE problem with time span from 0.0 to 1.0
 tspan = (0.0, 1.0)
-ode = semidiscretize(semi, tspan);
+ode = semidiscretize(semi, tspan)
 
 # At the beginning of the main loop, the SummaryCallback prints a summary of the simulation setup
 # and resets the timers