ssh_config "=" means no comment at the end of the line #92

Co-authored-by: warjiang <[email protected]>

README.cn.md

@@ -609,6 +609,21 @@ trzsz-ssh ( tssh ) 设计为 ssh 客户端的直接替代品，提供与 openssh
   SetTerminalTitle = Yes
   ```
 
+## 配置注释
+
+- `tssh` 配置中的注释基本与 `openssh` 一致，额外做了一些扩展支持，详见下表：
+
+| 注释                  | openssh |  tssh  |
+| :-------------------- | :-----: | :----: |
+| `#` 开头的配置行      | 是注释  | 是注释 |
+| `#!!` 开头的配置行    | 是注释  | 非注释 |
+| `Key Value # Comment` | 看情况  | 是注释 |
+| `Key=Value # Comment` | 看情况  | 非注释 |
+
+- `#` 开头的配置行，`openssh` 一律认为是注释；`tssh` 认为 `#!!` 开头的配置行不是注释，其他以 `#` 开头的配置行是注释。
+- `Key Value # Comment` 配置（没有 `=` 号），`openssh` 有些情况认为 `#` 后的内容是注释，有些情况认为不是注释；`tssh` 一律认为 `#` 后的内容是注释。
+- `Key=Value # Comment` 配置（有 `=` 号），`openssh` 有些情况认为 `#` 后的内容是注释，有些情况认为不是注释；`tssh` 一律认为 `#` 后的内容不是注释。
+
 ## 其他功能
 
 - 使用 `-f` 后台运行时，可以加上 `--reconnect` 参数，在后台进程因连接断开等而退出时，会自动重新连接。

README.en.md

@@ -609,6 +609,23 @@ trzsz-ssh ( tssh ) is an ssh client designed as a drop-in replacement for the op
   SetTerminalTitle = Yes
   ```
 
+## Comments of Config
+
+- The comments in the `tssh` configuration are basically the same as `openssh`, with some additional extended support, see the following table for details:
+
+| Comments              |   openssh    |     tssh      |
+| :-------------------- | :----------: | :-----------: |
+| Starting with `#`     | Is a comment | Is a comment  |
+| Starting with `#!!`   | Is a comment | Not a comment |
+| `Key Value # Comment` |  It depends  | Is a comment  |
+| `Key=Value # Comment` |  It depends  | Not a comment |
+
+- Configuration starting with `#` are always considered by `openssh` to be a comment; `tssh` considers configuration starting with `#!!` not to be a comment, and other configurations starting with `#` are comments.
+
+- `Key Value # Comment` configuration (without `=` sign), `openssh` considers the content after `#` to be a comment in some cases, and considers it not to be a comment in some other cases; `tssh` always considers the content after `#` to be a comment.
+
+- `Key=Value # Comment` configuration (with `=` sign), `openssh` considers the content after `#` to be a comment in some cases, and considers it not to be a comment in some other cases; `tssh` always considers the content after `#` not to be a comment.
+
 ## Other Features
 
 - Use `-f` to run in the background, you can add `--reconnect`, it will automatically reconnect when the background process exits.

README.md

@@ -40,6 +40,7 @@ trzsz-ssh ( tssh ) offers additional useful features:
 | [Automated Interaction](README.en.md#automated-interaction) | [自动交互](README.cn.md#%E8%87%AA%E5%8A%A8%E4%BA%A4%E4%BA%92) |
 |     [Remember Password](README.en.md#remember-password)     | [记住密码](README.cn.md#%E8%AE%B0%E4%BD%8F%E5%AF%86%E7%A0%81) |
 |  [Custom Configuration](README.en.md#custom-configuration)  | [个性配置](README.cn.md#%E4%B8%AA%E6%80%A7%E9%85%8D%E7%BD%AE) |
+|    [Comments of Config](README.en.md#comments-of-config)    | [配置注释](README.cn.md#%E9%85%8D%E7%BD%AE%E6%B3%A8%E9%87%8A) |
 |        [Other Features](README.en.md#other-features)        | [其他功能](README.cn.md#%E5%85%B6%E4%BB%96%E5%8A%9F%E8%83%BD) |
 
 ## Installation

go.mod

@@ -21,7 +21,7 @@ require (
 	github.com/trzsz/go-arg v1.5.3
 	github.com/trzsz/iterm2 v0.1.2
 	github.com/trzsz/promptui v0.10.7
-	github.com/trzsz/ssh_config v1.3.4
+	github.com/trzsz/ssh_config v1.3.5
 	github.com/trzsz/trzsz-go v1.1.8-0.20240303135018-b95b67671472
 	golang.org/x/crypto v0.20.0
 	golang.org/x/sys v0.17.0

go.sum

@@ -95,8 +95,8 @@ github.com/trzsz/iterm2 v0.1.2 h1:VwfLzr2fKeaLf+p4tS0ms+kqdiQQxVLbTJUoyuQXmK8=
 github.com/trzsz/iterm2 v0.1.2/go.mod h1:PMI+3JcT7J9D0T6e3mOWv8ICYdrrNZwuge3Tm7zDLws=
 github.com/trzsz/promptui v0.10.7 h1:77uBrmsIPYYJS/9n+zwFRhwOz82EKXkkdjOiWSEUPpk=
 github.com/trzsz/promptui v0.10.7/go.mod h1:9dp59ixe32qBV9GjDxQ1PDWwbzHjTzveZenQwEoVHbg=
-github.com/trzsz/ssh_config v1.3.4 h1:7of+6rUmdWdqfgXnH9csgJe1kNkriS9xOiFGx4KCkEw=
-github.com/trzsz/ssh_config v1.3.4/go.mod h1:Dl1okTjVVfsrtTA8nqkJ1OnjiCrZY6DUEI2DGT2/YoQ=
+github.com/trzsz/ssh_config v1.3.5 h1:wSZT2PG/7IICvHTIGeDQF5xT5HMXwRfYdnC8IcM3Yk8=
+github.com/trzsz/ssh_config v1.3.5/go.mod h1:Dl1okTjVVfsrtTA8nqkJ1OnjiCrZY6DUEI2DGT2/YoQ=
 github.com/trzsz/trzsz-go v1.1.8-0.20240303135018-b95b67671472 h1:ZtVHV/7EQCJmqUS2ZDPfYVn0IUVF7nXj6d6rF7v90dc=
 github.com/trzsz/trzsz-go v1.1.8-0.20240303135018-b95b67671472/go.mod h1:WLMZCtkmAKnH66bHRhB2iFbY/e+wBPDGkeOJuP60qxY=
 go.uber.org/goleak v1.3.0 h1:2K3zAYmnTNqV73imy9J1T3WC+gmCePx2hEGkimedGto=