Config and Release Notes Updates

- More config file cleanup
- Per Issue #498, added VDAEMU_SERKBD default change in Release Notes

RELEASE_NOTES.md

@@ -4,7 +4,7 @@ release of RomWBW.
 All Versions
 ============
 
-- Please review Section "15 Upgrading" of the RomWBW User Guide.
+- Please review the "Upgrading" Section of the RomWBW User Guide.
 
 - Many RomWBW-specific applications are locked to the ROM version
   being used.  After upgrading your ROM, you will need to upgrade
@@ -15,15 +15,21 @@ Version 3.5
 
 - RomWBW is now more strict with respect to hard disk partition
   tables.  If your hard disk media was created using any of the
-  pre-built disk image files, this will **not** affect you.  If not,
+  pre-built disk image files, this will **not** affect you.  Otherwise,
   you may find you are unable to access slices beyond the first
   slice.  If so, use FDISK80 to reset the partition table on the
   disk.  This will restore normal access to all slices.  **Only** do
   this if you are having an issue.
 
-- For those building custom ROMs, if you overriding
-  DEFSERCFG, note that this setting has been moved to a #DEFINE
-  instead of an equate (.SET or .EQU).  See cfg_MASTER.asm for
-  an example.  You will need to change your setting to a #DEFINE
-  at the top of your config file and remove any .SET or .EQU
-  lines for DEFSERCFG.
+- For those building custom ROMs that are overriding `DEFSERCFG`, note 
+  that this setting has been moved to a `#DEFINE` instead of an equate 
+  (`.SET` or `.EQU`).  You will find this `#DEFINE` at the top of all
+  standard config files.  You will need to change your setting to a
+  `#DEFINE` at the top of your config file and remove any `.SET` or
+  `.EQU` lines for `DEFSERCFG`.
+
+- Combining config settings `AUTOCON` and `VDAEMU_SERKBD` causes issues
+  at the boot loader prompt.  So, all config files have been changed to
+  consistently enable `AUTOCON` and disable `VDAEMU_SERKBD` (`$FF`).  If
+  are want to use `VDAEMU_SERKBD`, you need to set it in your config
+  file as well as disabling AUTOCON.

Source/HBIOS/Config/DUO_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_DUO.asm"
 ;

Source/HBIOS/Config/DYNO_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_DYNO.asm"
 ;

Source/HBIOS/Config/EPITX_std.asm

@@ -44,8 +44,8 @@
 ;
 #DEFINE	PLATFORM_NAME	"Z180 MiniITX"
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_EPITX.asm"
 ;

Source/HBIOS/Config/FZ80_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_FZ80.asm"
 ;

Source/HBIOS/Config/GMZ180_std.asm

@@ -42,10 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE PLATFORM_NAME "GM STD BUS Z180", " [", CONFIG, "]"
-;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_GMZ180.asm"
 ;

Source/HBIOS/Config/HEATH_std.asm

@@ -42,7 +42,30 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_HEATH.asm"
+;
+BOOT_TIMEOUT	.SET	-1		; AUTO BOOT TIMEOUT IN SECONDS, -1 TO DISABLE, 0 FOR IMMEDIATE
+BOOT_PRETTY	.SET	FALSE		; BOOT WITH PRETTY PLATFORM NAME
+AUTOCON		.SET	TRUE		; ENABLE CONSOLE TAKEOVER AT LOADER PROMPT
+;
+CPUOSC		.SET	16384000	; CPU OSC FREQ IN MHZ
+;
+UARTENABLE	.SET	TRUE		; UART: ENABLE 8250/16550-LIKE SERIAL DRIVER (UART.ASM)
+;
+TMSENABLE	.SET	TRUE		; TMS: ENABLE TMS9918 VIDEO/KBD DRIVER (TMS.ASM)
+TMSMODE		.SET	TMSMODE_MSX	; TMS: DRIVER MODE: TMSMODE_[SCG|N8|MSX|MSXKBD|MSXMKY|MBC|COLECO|DUO|NABU]
+TMS80COLS	.SET	TRUE		; TMS: ENABLE 80 COLUMN SCREEN, REQUIRES V9958
+TMSTIMENABLE	.SET	FALSE		; TMS: ENABLE TIMER INTERRUPTS (REQUIRES IM1)
+;
+FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
+FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+;
+PPIDEENABLE	.SET	TRUE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)
+;
+AY38910ENABLE	.SET	TRUE		; AY: ENABLE AY-3-8910 / YM2149 SOUND DRIVER
+AYMODE		.SET	AYMODE_MSX	; AY: DRIVER MODE: AYMODE_[SCG|N8|RCZ80|RCZ180|MSX|LINC|MBC|DUO|NABU]

Source/HBIOS/Config/MBC_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_MBC.asm"
 ;

Source/HBIOS/Config/MK4_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_MK4.asm"
 ;

Source/HBIOS/Config/MON_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_MON.asm"
 ;

Source/HBIOS/Config/N8_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS		; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_N8.asm"
 ;

Source/HBIOS/Config/NABU_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_38400_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_NABU.asm"
 ;

Source/HBIOS/Config/RCEZ80_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCEZ80.asm"
 ;

Source/HBIOS/Config/RCZ180_ext_std.asm

@@ -42,9 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
-#DEFINE DEFSERCFG SER_115200_8N1 | SER_RTS
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ180.asm"
 ;
@@ -84,6 +83,8 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;

Source/HBIOS/Config/RCZ180_nat_std.asm

@@ -42,9 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
-#DEFINE DEFSERCFG SER_115200_8N1 | SER_RTS
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ180.asm"
 ;
@@ -84,6 +83,8 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;

Source/HBIOS/Config/RCZ180_z1rcc_std.asm

@@ -44,8 +44,8 @@
 ;
 #DEFINE PLATFORM_NAME "Z1RCC", " [", CONFIG, "]"
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ180.asm"
 ;
@@ -83,6 +83,8 @@ MDRAM		.SET	TRUE		; MD: ENABLE RAM DISK
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;

Source/HBIOS/Config/RCZ280_ext_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;

Source/HBIOS/Config/RCZ280_nat_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;

Source/HBIOS/Config/RCZ280_zz80mb_std.asm

@@ -44,8 +44,8 @@
 ;
 #DEFINE PLATFORM_NAME "ZZ80MB", " [", CONFIG, "]"
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;

Source/HBIOS/Config/RCZ280_zzrcc_ram_std.asm

@@ -44,8 +44,8 @@
 ;
 #DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;

Source/HBIOS/Config/RCZ280_zzrcc_std.asm

@@ -44,8 +44,8 @@
 ;
 #DEFINE PLATFORM_NAME "ZZRCC", " [", CONFIG, "]"
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ280.asm"
 ;

Source/HBIOS/Config/RCZ80_coleco_std.asm

@@ -62,8 +62,8 @@
 ; EVEN BETTER, YOU CAN MAKE A COPY OF THIS FILE WITH A NAME LIKE <PLT>_XXX.ASM AND SPECIFY
 ; YOUR FILE IN THE BUILD PROCESS.
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "Config/RCZ80_std.asm"
 ;

Source/HBIOS/Config/RCZ80_easy_std.asm

@@ -43,10 +43,8 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE PLATFORM_NAME "Easy-Z80", " [", CONFIG, "]"
-;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
-#DEFINE DEFSERCFG SER_115200_8N1 | SER_RTS
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ80.asm"
 ;
@@ -95,6 +93,8 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;

Source/HBIOS/Config/RCZ80_ez512_std.asm

@@ -43,10 +43,8 @@
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
 #DEFINE PLATFORM_NAME "EaZy80-512", " [", CONFIG, "]"
-;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
-#DEFINE DEFSERCFG SER_115200_8N1 | SER_RTS
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ80.asm"
 ;
@@ -97,9 +95,6 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 MDROM		.SET	FALSE		; MD: ENABLE ROM DISK
 ;
-FDENABLE	.SET	FALSE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
-FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
-;
 IDEENABLE	.SET	FALSE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;
 PPIDEENABLE	.SET	FALSE		; PPIDE: ENABLE PARALLEL PORT IDE DISK DRIVER (PPIDE.ASM)

Source/HBIOS/Config/RCZ80_k80w_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "Config/RCZ80_std.asm"
 ;

Source/HBIOS/Config/RCZ80_kio_std.asm

@@ -42,8 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "Config/RCZ80_std.asm"
 ;

Source/HBIOS/Config/RCZ80_skz_std.asm

@@ -42,9 +42,8 @@
 ; ".SET" TO OVERRIDE SETTINGS.  THE ASSEMBLER WILL ERROR IF YOU ATTEMPT
 ; TO USE ".EQU" BECAUSE IT WON'T LET YOU REDEFINE A SETTING WITH ".EQU".
 ;
-#DEFINE	BOOT_DEFAULT	"H"		; DEFAULT BOOT LOADER CMD FOR EMPTY CMD LINE
 #DEFINE AUTO_CMD	""		; AUTO CMD WHEN BOOT_TIMEOUT IS ENABLED
-#DEFINE DEFSERCFG SER_115200_8N1 | SER_RTS
+#DEFINE DEFSERCFG	SER_115200_8N1 | SER_RTS	; DEFAULT SERIAL CONFIGURATION
 ;
 #INCLUDE "cfg_RCZ80.asm"
 ;
@@ -85,6 +84,8 @@ EFENABLE	.SET	FALSE		; EF: ENABLE EF9345 VIDEO DRIVER (EF.ASM)
 ;
 FDENABLE	.SET	TRUE		; FD: ENABLE FLOPPY DISK DRIVER (FD.ASM)
 FDMODE		.SET	FDMODE_RCWDC	; FD: DRIVER MODE: FDMODE_[DIO|ZETA|ZETA2|DIDE|N8|DIO3|RCSMC|RCWDC|DYNO|EPFDC|MBC]
+FD0TYPE		.SET	FDT_3HD		; FD 0: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
+FD1TYPE		.SET	FDT_3HD		; FD 1: DRIVE TYPE: FDT_[3DD|3HD|5DD|5HD|8]
 ;
 IDEENABLE	.SET	TRUE		; IDE: ENABLE IDE DISK DRIVER (IDE.ASM)
 ;