Modified Marlin bugfix-2.0.x firmware for the Sovol3D SV01 with BigTreeTec SKR 1.3 using TMC2209 stepper drivers and BLTouch auto bed leveling sensor.
Stock extruder was exchanged for a pancake stepper. The powerfull stock extruder stepper is reused as Y-stepper in this firmware.
- Easy manual bed leveling via Corner Bed Leveling in the menu
- Enabled Unified Bed Leveling via Menu or G29 (Has to be calibrated individually)
- Enabled dual Z-Axis alignment via menu or G34
- Active Linear Advance v1.5 (Has to be calibrated individually)
- Active Junction Deviation (Has to be calibrated individually)
- Active S-Curve Acceleration
Quick Home moves both X and Y initially for faster homing(Disabled because of issues with sensorless homing)- Home X, Y, and Z individually via menu if you want
- Enabled Advanced Pause feature for filament changes during print e.g. with M600
- Optimized XY NOZZLE_TO_PROBE offset for accurate probing
- Enabled Adaptive Step Smoothing to further reduce vibrations and noise
- Precise stepping information on screen with one decimal digit
- Long message scrolling
- Show filament length used during print
- Babystepping enabled to optimize first layer
- Enabled the "Disable Soft Endstops" menu
⚠️ Use carefully! This can damage your bed surface. - 290x250x300mm (WxDxH) Usable build volume without hardware modifications
- Tracks statistical data (local) such as:
- Total print jobs
- Total successful print jobs
- Total failed print jobs
- Total time printing
- View with M78
- Based on Marlins bugfix-2.0.x branch
- merged with Sovol3Ds Marlin 2.0 firmware release
Provided as-is without any liability
