AP_Scripting: added INF_Inject EFI driver

libraries/AP_Scripting/drivers/INF_Inject.lua

@@ -0,0 +1,247 @@
+--[[
+ Driver for INF_Inject EFI system
+
+ https://innoflighttechnology.com/efi/
+--]]
+
+local PARAM_TABLE_KEY = 43
+local PARAM_TABLE_PREFIX = "EFI_INF_"
+
+local MAV_SEVERITY = {EMERGENCY=0, ALERT=1, CRITICAL=2, ERROR=3, WARNING=4, NOTICE=5, INFO=6, DEBUG=7}
+
+-- bind a parameter to a variable given
+local function bind_param(name)
+    local p = Parameter()
+    assert(p:init(name), string.format('could not find %s parameter', name))
+    return p
+end
+
+-- add a parameter and bind it to a variable
+local function bind_add_param(name, idx, default_value)
+    assert(param:add_param(PARAM_TABLE_KEY, idx, name, default_value), string.format('could not add param %s', name))
+    return bind_param(PARAM_TABLE_PREFIX .. name)
+end
+
+-- setup script specific parameters
+assert(param:add_table(PARAM_TABLE_KEY, PARAM_TABLE_PREFIX, 8), 'could not add param table')
+
+--[[
+  // @Param: EFI_INF_ENABLE
+  // @DisplayName: EFI INF-Inject enable
+  // @Description: Enable EFI INF-Inject driver
+  // @Values: 0:Disabled,1:Enabled
+  // @User: Standard
+--]]
+EFI_INF_ENABLE = bind_add_param("ENABLE", 1, 0)
+
+if EFI_INF_ENABLE:get() ~= 1 then
+   return
+end
+
+local EFI_FUEL_DENS = bind_param("EFI_FUEL_DENS")
+
+local uart = serial:find_serial(0) -- first scripting serial
+if not uart then
+   gcs:send_text(MAV_SEVERITY.ERROR, "EFI_INF: unable to find scripting serial")
+   return
+end
+uart:begin(9600)
+
+local efi_backend = efi:get_backend(0)
+if not efi_backend then
+   gcs:send_text(MAV_SEVERITY.ERROR, "EFI_INF: unable to find EFI backend")
+   return
+end
+
+local state = {}
+state.last_read_us = uint32_t(0)
+state.chk0 = 0
+state.chk1 = 0
+state.total_fuel_g = 0.0
+
+local function read_bytes(n)
+   local ret = ""
+   for _ = 1, n do
+      local b = uart:read()
+      state.chk0 = state.chk0 ~ b
+      state.chk1 = state.chk1 ~ state.chk0
+      ret = ret .. string.char(b)
+   end
+   return ret
+end
+
+--[[
+   discard pending bytes
+--]]
+local function discard_pending()
+   local n = uart:available():toint()
+   for _ = 1, n do
+      uart:read()
+   end
+end
+
+--[[
+   convert grams of fuel to cm3
+--]]
+local function gram_to_cm3(g)
+   local kg = g * 0.001
+   local kg_per_m3 = EFI_FUEL_DENS:get()
+   if kg_per_m3 <= 0 then
+      kg_per_m3 = 742.9
+   end
+   local m3 = kg / kg_per_m3
+   return m3 * 1.0e6
+end
+
+--[[
+   check for input and parse data
+--]]
+local function check_input()
+   local n_bytes = uart:available():toint()
+   if n_bytes < 83 then
+      return
+   end
+   if n_bytes > 83 then
+      discard_pending()
+      return
+   end
+
+   local tus = micros()
+   state.chk0 = 0
+   state.chk1 = 0
+
+   -- look for basic data table 2
+   header0, header1, source, target, dtype, num, id, ack = string.unpack("<BBBBBBIB", read_bytes(11))
+   if header0 ~= 0xB5 or header1 ~= 0x62 then
+      gcs:send_text(MAV_SEVERITY.INFO, string.format("bad header 0x%02x 0x%0x2", header0, header1))
+      discard_pending()
+      return
+   end
+   if dtype ~= 0x02 then
+      gcs:send_text(MAV_SEVERITY.INFO, string.format("bad type3 0x%02x", dtype))
+      discard_pending()
+      return
+   end
+   if ack ~= 0x50 then
+      gcs:send_text(MAV_SEVERITY.INFO, string.format("bad ack 0x%02x", ack))
+      discard_pending()
+      return
+   end
+   if num < 83 then
+      gcs:send_text(MAV_SEVERITY.INFO, string.format("bad num %u n_bytes=%u", num, n_bytes))
+      discard_pending()
+      return
+   end
+
+   --gcs:send_text(MAV_SEVERITY.INFO, string.format("packet start"))
+
+   state.mode, state.sta, state.sta1, state.bus_thr = string.unpack("<BBBB", read_bytes(4))
+   state.bus_thr = state.bus_thr * 0.1
+   state.svr_pwm, state.rpm_out, state.rpm1, state.rpm2 = string.unpack("<BHHH", read_bytes(7))
+   state.svr_pwm = state.svr_pwm * 0.1
+   state.tmp_env, state.tmp0, state.tmp1, state.tmp2, state.tmp3 = string.unpack("<hhhhh", read_bytes(10))
+   state.vol_power, state.vol_svr, state.vol_pump, state.amp_pump = string.unpack("<HBBB", read_bytes(5))
+   state.vol_power = state.vol_power * 0.1
+   state.vol_svr = state.vol_svr * 0.1
+   state.vol_pump = state.vol_pump * 0.1
+   state.amp_pump = state.amp_pump * 0.1
+   state.ADC1, state.ADC2, state.pre_gas, state.pre_alt = string.unpack("<BBfh", read_bytes(8))
+   state.ADC1 = state.ADC1 * 0.1
+   state.ADC2 = state.ADC2 * 0.1
+   state.PWM_IN1, state.PWM_IN2, state.PWM_IN3 = string.unpack("<BBB", read_bytes(3))
+   state.PWM_IN1 = state.PWM_IN1 * 10
+   state.PWM_IN2 = state.PWM_IN2 * 10
+   state.PWM_IN3 = state.PWM_IN3 * 10
+   state.PWM_OUT1, state.PWM_OUT2, state.PWM_OUT3 = string.unpack("<BBB", read_bytes(3))
+   state.pre_oil, state.inj1_ms, state.inj2_ms = string.unpack("<fhh", read_bytes(8))
+   state.inj1_mg, state.inj2_mg = string.unpack("<hh", read_bytes(4))
+   state.adc1_thr, state.adc2_thr = string.unpack("<BB", read_bytes(2))
+   state.adc1_thr = state.adc1_thr * 10
+   state.adc2_thr = state.adc2_thr * 10
+   state.ecu_run_time, state.err_flg = string.unpack("<IH", read_bytes(6))
+   state.oil1_thr, state.oil2_thr = string.unpack("<BB", read_bytes(2))
+   state.oil1_thr = state.oil1_thr * 10
+   state.oil2_thr = state.oil2_thr * 10
+   state.reserve1, state.reserve2 = string.unpack("<BB", read_bytes(2))
+   state.tmp4, state.tmp5 = string.unpack("<hh", read_bytes(4))
+
+   local chk0 = state.chk0
+   local chk1 = state.chk1
+   state.check0, state.check1 = string.unpack("<BB", read_bytes(2))
+   if chk0 ~= state.check0 or 0x00 ~= state.check1 then
+      gcs:send_text(MAV_SEVERITY.INFO, string.format("chksum wrong (0x%02x,0x%02x) (0x%02x,0x%02x)", chk0, chk1, state.check0, state.check1))
+      --discard_pending()
+      --return
+   end
+   state.end0, state.end1 = string.unpack("<BB", read_bytes(2))
+
+   if state.end0 ~= 0x0d or state.end1 ~= 0x0a then
+      gcs:send_text(MAV_SEVERITY.INFO, string.format("end wrong 0x%02x 0x%02x", state.end0, state.end1))
+      discard_pending()
+      return
+   end
+
+   local dt = (tus - state.last_read_us):tofloat()*1.0e-6
+
+   local fuel_g_rev = (state.inj1_mg + state.inj2_mg)
+   state.fuel_g_per_min = fuel_g_rev * state.rpm1
+   state.total_fuel_g = state.total_fuel_g + (state.fuel_g_per_min * dt / 60.0)
+
+   state.last_read_us = micros()
+
+   -- discard the rest
+   discard_pending()
+
+   gcs:send_named_float('VOL_SRV', state.vol_svr)
+   gcs:send_named_float('VOL_PUMP', state.vol_pump)
+   gcs:send_named_float('INF_ETEMP', state.tmp_env)
+   gcs:send_named_float('INF_TEMP1', state.tmp0)
+   gcs:send_named_float('INF_TEMP2', state.tmp1)
+end
+
+--[[
+   update EFI state
+--]]
+local function update_EFI()
+   if state.last_read_us == uint32_t(0) then
+      return
+   end
+   local cylinder_state = Cylinder_Status()
+   local efi_state = EFI_State()
+
+   cylinder_state:cylinder_head_temperature(state.tmp0)
+   cylinder_state:exhaust_gas_temperature(state.tmp1)
+   cylinder_state:injection_time_ms(state.inj1_ms)
+
+   efi_state:engine_speed_rpm(state.rpm_out)
+
+   efi_state:atmospheric_pressure_kpa(state.pre_gas*0.01)
+   efi_state:intake_manifold_temperature(state.tmp2)
+   efi_state:throttle_position_percent(math.floor(state.bus_thr*0.1))
+   efi_state:ignition_voltage(state.vol_power)
+
+   efi_state:cylinder_status(cylinder_state)
+   efi_state:last_updated_ms(millis())
+   efi_state:fuel_pressure(state.pre_oil)
+
+   efi_state:fuel_consumption_rate_cm3pm(gram_to_cm3(state.fuel_g_per_min))
+   efi_state:estimated_consumed_fuel_volume_cm3(gram_to_cm3(state.total_fuel_g))
+
+   -- Set the EFI_State into the EFI scripting driver
+   efi_backend:handle_scripting(efi_state)
+end
+
+
+--[[
+   main update function
+--]]
+local function update()
+   check_input()
+   update_EFI()
+
+   return update, 10
+end
+
+gcs:send_text(MAV_SEVERITY.INFO, "EFI_INF: loaded")
+
+return update()

libraries/AP_Scripting/drivers/INF_Inject.md

@@ -0,0 +1,38 @@
+# INF Inject Driver
+
+This driver implements support for the INF Inject EFI engine
+control units.
+
+ https://innoflighttechnology.com/efi/
+
+# Parameters
+
+The script used the following parameters:
+
+## EFI_INF_ENABLE
+
+this must be set to 1 to enable the driver
+
+# Operation
+
+This driver should be loaded by placing the lua script in the
+APM/SCRIPTS directory on the microSD card, which can be done either
+directly or via MAVFTP. The following key parameters should be set:
+
+ - SCR_ENABLE should be set to 1
+ - EFI_TYPE should be set to 7
+ - EFI_INF_ENABLE should be set to 1
+ - SERIALn_PROTOCOL should be set to 28 for the connected EFI serial
+ - RPM_TYPE1 should be set to 3
+ - ICE_ENABLE should be set to 1
+
+then the flight controller should rebooted and parameters should be
+refreshed.
+
+Once loaded the EFI_INF_ENABLE parameters will appear and should be set
+according to the parameter list above.
+
+The GCS will receive EFI_STATUS MAVLink messages which includes RPM,
+cylinder head temperature, exhaust gas temperature, injection timing,
+engine load, fuel consumption rate, throttle position atmospheric
+pressure and ignition voltage.