Giggletech Haptics Server - README

Files Included

1. config.yml
   Stores all your device settings and configurations for Giggletech haptics.

2. config_multiple_devices.yml
   An example configuration file for when you have multiple Giggletech devices.

3. Giggletech_OSCQuery_Installer.exe
   The OSCQuery Helper, required for managing OSC communication with VRChat.

4. giggletech_server_1.3.1.exe
   The main Giggletech software that manages communication between VRChat and your device(s).

5. giggletech_vrc_simulator.exe
   A testing tool that allows you to test your devices without needing a VRChat avatar or setup.

Overview

This guide will help you set up and configure your Giggletech device, software, and server for use in VRChat and other compatible platforms. Follow the steps below to get started.

Step 1: Configure Your Giggletech Device

About Giggletech Devices

Status LED:

• Initial Power-Up: 3 quick blinks.
• Normal Operation: 3 more blinks, 3 buzzes. Light will be off. LED lights up when pat commands are received.
• Configuration Mode: Solid LED.

Enter Configuration Mode:

1. Power up the device (3 blinks).
2. Unplug and re-plug it in. The LED will go solid, indicating configuration mode.

Connect the Device to Wi-Fi:

1. Connect to the "Giggletech_haptics" Wi-Fi network (password: giggletech).
2. Your phone may automatically direct you to the configuration page. If not, open a browser and go to http://192.168.4.1.
3. Select your Wi-Fi network from the list and enter your Wi-Fi password.

IP Setup:

• Automatic (Recommended): Uncheck 'Use static IP' and click 'Save'.
• Static IP (Advanced): Set your IP, Gateway, and Subnet manually.

After saving, unplug and re-plug the device to apply settings. The device will blink 3 times and buzz 3 times, indicating successful connection.

Step 2: Giggletech Software Setup

Software Package Includes:

Install the Software:

1. Download the latest version from the Giggletech GitHub.
2. Run the Giggletech_OSCQuery_Installer.exe to install the OSCQuery Helper.

Step 3: Configure the YML File

1. Find Your Device's IP: Visit http://giggletech.local. If it doesn’t load, ensure the Bonjour Service is installed from https://developer.apple.com/bonjour/.

2. Edit the YML File: Open "config.yml" using Notepad. Replace the default IP (192.168.1.69) with the one obtained from giggletech.local or your static IP setup.

3. Multiple Devices: Add multiple devices to the YML by copying the format and assigning unique IPs. Power up each device separately.

4. Save Your Changes: After updating, save the file and close the editor.

Step 4: Test Your System

Before entering VRChat:

1. Open the Giggletech Server software.
2. Run gigglepuck_vrc_simulator.exe to emulate a VRChat environment.
3. Follow the simulator prompts to confirm your hardware setup.

Note: The Giggletech Server must remain open while using VRChat to receive haptic interactions.

For further assistance, visit our Discord or contact us via email.