Created Procedure for Setting Up a Scaler

content/docs/2.14/operate/setupscaler.md

@@ -0,0 +1,116 @@
++++
+title = "Setupscaler"
+weight = 500
+description = "Procedure to Setup a Scaler in KEDA"
++++
+
+## Prerequisites
+
+1. **Kubernetes Cluster**:
+   - Ensure you have a running Kubernetes cluster set up and accessible.
+   - If you don't have a cluster yet, follow the [official Kubernetes documentation](https://kubernetes.io/docs/setup/) to create a new cluster suitable for your environment (local machine, cloud provider, etc.).
+
+2. **KEDA Installation**:
+   - KEDA needs to be installed on your Kubernetes cluster before you can use it.
+   - Follow the [KEDA installation guide](https://keda.sh/docs/2.14/deploy/) carefully, including any prerequisites specific to your Kubernetes setup.
+   - The installation guide provides instructions for different installation methods (e.g., YAML, Helm charts, etc.). Choose the method that suits your needs.
+
+3. **kubectl**:
+   - The `kubectl` command-line tool is required to interact with your Kubernetes cluster.
+   - Follow the [official kubectl installation guide](https://kubernetes.io/docs/tasks/tools/#kubectl) to install `kubectl` on your operating system.
+   - Once installed, configure `kubectl` to communicate with your Kubernetes cluster by following the cluster-specific instructions provided by your Kubernetes setup.
+
+## Step 1: Identify the Scaler You Need
+
+KEDA supports various scalers that correspond to different event sources or triggers. Determining the right scaler is crucial for scaling your application based on the desired event source.
+
+1. Visit the [KEDA Scalers documentation](https://keda.sh/docs/2.14/scalers/) and browse through the list of available scalers.
+2. Identify the scaler that matches the event source you want to use for scaling your application. For example:
+   - If you want to scale based on incoming HTTP traffic, you would need the **HTTP scaler**.
+   - If you want to scale based on messages in a RabbitMQ queue, you would need the **RabbitMQ scaler**.
+   - If you want to scale based on a cron schedule, you would need the **Cron scaler**.
+3. Open the documentation page for your chosen scaler and familiarize yourself with its specific requirements and configuration options.
+
+## Step 2: Install the Required Scaler (if needed)
+
+Some scalers are part of the core KEDA installation, while others need to be installed separately as add-ons.
+
+1. Refer to the documentation of your chosen scaler to check if it needs to be installed separately.
+2. If the scaler needs to be installed separately, follow the installation instructions provided in the scaler's documentation carefully.
+   - The installation process typically involves running a command (e.g., `helm install` for Helm charts) or applying YAML manifests using `kubectl`.
+3. Verify that the scaler has been installed successfully by checking the output of the installation process or by running any provided verification commands.
+
+## Step 3: Create a ScaledObject Configuration File
+
+KEDA uses a custom resource called `ScaledObject` to define how your application should be scaled based on the chosen event source or trigger.
+
+1. Create a new file (e.g., `scaledobject.yaml`) in a text editor or using the command line.
+2. Define the `ScaledObject` configuration in this file, following the structure and examples provided in the documentation of your chosen scaler.
+3. Typically, the `ScaledObject` configuration includes the following sections:
+   - `metadata`: Specifies the name and namespace for the `ScaledObject`.
+   - `spec.scaleTargetRef`: Identifies the Kubernetes deployment or other resource that should be scaled.
+   - `spec.pollingInterval` (optional): Specifies how often KEDA should check for scaling events (defaults to 15 seconds).
+   - `spec.cooldownPeriod` (optional): Specifies the cool-down period in seconds after a scaling event (defaults to 300 seconds).
+   - `spec.maxReplicaCount` (optional): Specifies the maximum number of replicas to scale up to (defaults to 100).
+   - `spec.triggers`: Defines the specific configuration for your chosen scaler, including any required parameters or settings.
+4. Refer to the scaler's documentation for detailed explanations and examples of the `triggers` section and any other required or optional configuration settings.
+5. Save the `scaledobject.yaml` file after making the necessary modifications.
+
+## Step 4: Apply the ScaledObject Configuration
+
+Once you have created the `ScaledObject` configuration file, apply it to your Kubernetes cluster using `kubectl`:
+
+1. Open a terminal or command prompt and navigate to the directory containing the `scaledobject.yaml` file.
+2. Run the following command to apply the `ScaledObject` configuration:
+
+   ```bash
+   kubectl apply -f scaledobject.yaml
+   ```
+
+   ```plaintext
+   scaledobject.keda.sh/<scaled-object-name> created
+   ```
+
+3. Verify that the `ScaledObject` has been created successfully by running:
+
+   ```bash
+   kubectl get scaledobjects
+   ```
+
+   This should display the `ScaledObject` you just created.
+
+   ```plaintext
+   NAME              SCALETARGETKIND   SCALETARGETNAME   MIN   MAX   TRIGGERS   AUTHENTICATION   READY   ACTIVE   FALLBACK   AGE
+   <scaled-object-name>   Deployment        <deployment-name>   1     10    cpu                    <none>            True    False    <none>      10s
+   ```
+
+After applying the `ScaledObject` configuration, KEDA will start monitoring the specified event source and scale your application accordingly, based on the configurations you provided.
+
+## Step 5: Monitor Scaling Events
+
+You can monitor the scaling events and logs generated by KEDA using the following commands:
+
+1. List all `ScaledObjects` in your cluster:
+
+   ```bash
+   kubectl get scaledobjects
+   ```
+
+   This will show you the current state of your `ScaledObject` and the number of replicas.
+
+   ```plaintext
+   NAME              SCALETARGETKIND   SCALETARGETNAME   MIN   MAX   TRIGGERS   AUTHENTICATION   READY   ACTIVE   FALLBACK   AGE
+   <scaled-object-name>   Deployment        <deployment-name>   1     10    cpu                    <none>            True    False    <none>      10s
+   ```
+
+2. View the logs of the KEDA operator:
+
+   ```bash
+   kubectl logs -n keda -l app=keda-operator
+   ```
+
+   The KEDA operator logs will show you detailed information about scaling events, decisions made by KEDA based on the event source, and any errors or warnings.
+
+   ```plaintext
+   {"level":"info","ts":<timestamp>,"logger":"scalehandler","msg":"Successfully scaled deployment","scaledobject.Namespace":"<namespace>","scaledobject.Name":"<scaled-object-name>","scaler":<scaler-type>}
+   ```

content/docs/2.15/operate/setupscaler.md

@@ -0,0 +1,116 @@
++++
+title = "Setupscaler"
+weight = 500
+description = "Procedure to Setup a Scaler in KEDA"
++++
+
+## Prerequisites
+
+1. **Kubernetes Cluster**:
+   - Ensure you have a running Kubernetes cluster set up and accessible.
+   - If you don't have a cluster yet, follow the [official Kubernetes documentation](https://kubernetes.io/docs/setup/) to create a new cluster suitable for your environment (local machine, cloud provider, etc.).
+
+2. **KEDA Installation**:
+   - KEDA needs to be installed on your Kubernetes cluster before you can use it.
+   - Follow the [KEDA installation guide](https://keda.sh/docs/2.14/deploy/) carefully, including any prerequisites specific to your Kubernetes setup.
+   - The installation guide provides instructions for different installation methods (e.g., YAML, Helm charts, etc.). Choose the method that suits your needs.
+
+3. **kubectl**:
+   - The `kubectl` command-line tool is required to interact with your Kubernetes cluster.
+   - Follow the [official kubectl installation guide](https://kubernetes.io/docs/tasks/tools/#kubectl) to install `kubectl` on your operating system.
+   - Once installed, configure `kubectl` to communicate with your Kubernetes cluster by following the cluster-specific instructions provided by your Kubernetes setup.
+
+## Step 1: Identify the Scaler You Need
+
+KEDA supports various scalers that correspond to different event sources or triggers. Determining the right scaler is crucial for scaling your application based on the desired event source.
+
+1. Visit the [KEDA Scalers documentation](https://keda.sh/docs/2.14/scalers/) and browse through the list of available scalers.
+2. Identify the scaler that matches the event source you want to use for scaling your application. For example:
+   - If you want to scale based on incoming HTTP traffic, you would need the **HTTP scaler**.
+   - If you want to scale based on messages in a RabbitMQ queue, you would need the **RabbitMQ scaler**.
+   - If you want to scale based on a cron schedule, you would need the **Cron scaler**.
+3. Open the documentation page for your chosen scaler and familiarize yourself with its specific requirements and configuration options.
+
+## Step 2: Install the Required Scaler (if needed)
+
+Some scalers are part of the core KEDA installation, while others need to be installed separately as add-ons.
+
+1. Refer to the documentation of your chosen scaler to check if it needs to be installed separately.
+2. If the scaler needs to be installed separately, follow the installation instructions provided in the scaler's documentation carefully.
+   - The installation process typically involves running a command (e.g., `helm install` for Helm charts) or applying YAML manifests using `kubectl`.
+3. Verify that the scaler has been installed successfully by checking the output of the installation process or by running any provided verification commands.
+
+## Step 3: Create a ScaledObject Configuration File
+
+KEDA uses a custom resource called `ScaledObject` to define how your application should be scaled based on the chosen event source or trigger.
+
+1. Create a new file (e.g., `scaledobject.yaml`) in a text editor or using the command line.
+2. Define the `ScaledObject` configuration in this file, following the structure and examples provided in the documentation of your chosen scaler.
+3. Typically, the `ScaledObject` configuration includes the following sections:
+   - `metadata`: Specifies the name and namespace for the `ScaledObject`.
+   - `spec.scaleTargetRef`: Identifies the Kubernetes deployment or other resource that should be scaled.
+   - `spec.pollingInterval` (optional): Specifies how often KEDA should check for scaling events (defaults to 15 seconds).
+   - `spec.cooldownPeriod` (optional): Specifies the cool-down period in seconds after a scaling event (defaults to 300 seconds).
+   - `spec.maxReplicaCount` (optional): Specifies the maximum number of replicas to scale up to (defaults to 100).
+   - `spec.triggers`: Defines the specific configuration for your chosen scaler, including any required parameters or settings.
+4. Refer to the scaler's documentation for detailed explanations and examples of the `triggers` section and any other required or optional configuration settings.
+5. Save the `scaledobject.yaml` file after making the necessary modifications.
+
+## Step 4: Apply the ScaledObject Configuration
+
+Once you have created the `ScaledObject` configuration file, apply it to your Kubernetes cluster using `kubectl`:
+
+1. Open a terminal or command prompt and navigate to the directory containing the `scaledobject.yaml` file.
+2. Run the following command to apply the `ScaledObject` configuration:
+
+   ```bash
+   kubectl apply -f scaledobject.yaml
+   ```
+
+   ```plaintext
+   scaledobject.keda.sh/<scaled-object-name> created
+   ```
+
+3. Verify that the `ScaledObject` has been created successfully by running:
+
+   ```bash
+   kubectl get scaledobjects
+   ```
+
+   This should display the `ScaledObject` you just created.
+
+   ```plaintext
+   NAME              SCALETARGETKIND   SCALETARGETNAME   MIN   MAX   TRIGGERS   AUTHENTICATION   READY   ACTIVE   FALLBACK   AGE
+   <scaled-object-name>   Deployment        <deployment-name>   1     10    cpu                    <none>            True    False    <none>      10s
+   ```
+
+After applying the `ScaledObject` configuration, KEDA will start monitoring the specified event source and scale your application accordingly, based on the configurations you provided.
+
+## Step 5: Monitor Scaling Events
+
+You can monitor the scaling events and logs generated by KEDA using the following commands:
+
+1. List all `ScaledObjects` in your cluster:
+
+   ```bash
+   kubectl get scaledobjects
+   ```
+
+   This will show you the current state of your `ScaledObject` and the number of replicas.
+
+   ```plaintext
+   NAME              SCALETARGETKIND   SCALETARGETNAME   MIN   MAX   TRIGGERS   AUTHENTICATION   READY   ACTIVE   FALLBACK   AGE
+   <scaled-object-name>   Deployment        <deployment-name>   1     10    cpu                    <none>            True    False    <none>      10s
+   ```
+
+2. View the logs of the KEDA operator:
+
+   ```bash
+   kubectl logs -n keda -l app=keda-operator
+   ```
+
+   The KEDA operator logs will show you detailed information about scaling events, decisions made by KEDA based on the event source, and any errors or warnings.
+
+   ```plaintext
+   {"level":"info","ts":<timestamp>,"logger":"scalehandler","msg":"Successfully scaled deployment","scaledobject.Namespace":"<namespace>","scaledobject.Name":"<scaled-object-name>","scaler":<scaler-type>}
+   ```