Adding AFT Base cases

feature/aft/aft_base/otg_tests/aft_base/README.md

@@ -0,0 +1,179 @@
+# AFT-1.1: AFTs Base
+
+## Summary
+
+IPv4/IPv6 unicast routes next hop group and next hop.
+
+## Testbed
+
+* atedut_12.binding
+
+## Test Setup
+
+### Generate DUT and ATE Configuration
+
+Configure DUT:port1,port2,port3 for IS-IS session with ATE:port1,port2,port3
+*   IS-IS must be level 2 only with wide metric.
+*   IS-IS must be point to point.
+*   Send 1000 ipv4 and 1000 ipv6 IS-IS prefixes from ATE:port3 to DUT:port3.
+
+
+Establish eBGP sessions between ATE:port1,port2 and DUT:port1,port2 and another between ATE:port3 and DUT:port3.
+*   Configure eBGP over the interface ip.
+*   eBGP must be multipath.
+*   Advertise 1000 ipv4,ipv6 prefixes from ATE port1,port2 observe received prefixes at DUT.
+*   Validate total number of entries of AFT for IPv4 and IPv6.
+*   Each prefix must have 2 next hops pointing to ATE port1,port2.
+*   Advertise 100 ipv4,ipv6 from ATE port3 observe received prefixes at DUT.
+
+Establish RSVP Sessions between ATE:port3 and SUT:port3.
+*   Configure mpls and rsvp sessions.
+*   Configure 2 ingress TE tunnels from DUT:port3 to ATE:port3.
+*   Tunnel destination is interface ip of ATE:port3.
+*   Configure explicit null and ipv6 tunneling.
+*   BGP advertised routes from ATE:port3 must be pointing to the 2 tunnels in the DUT.
+
+### Procedure
+
+*   Use gNMI.Set with REPLACE option to push the Test Setup configuration to the DUT.
+*   ATE configuration must be pushed.
+
+### Verifications
+
+*   BGP route advertised from ATE:port1,port2 must have 2 nexthops.
+*   IS-IS route advertised from ATE:port3 must have one next hop.
+*   BGP route advertised from ATE:port3 must have 2 next hops pointing to tunnels.
+*   Use gnmi Subscribe with ON_CHANGE option to /network-instances/network-instance/afts.
+*   For verifying prefix, nexthop groups, next hop use the leaves mentioed in the path section.
+*   Verify afts prefix advertised by BGP,ISIS.
+*   Verify its next hop group, number of next hop and its interfaces.
+*   Verify the number of next hop is same as expected.
+*   Verify all other leaves mentioned in the path section.
+
+
+## AFT-1.1.1: AFT Base Link Down scenario 1
+
+### Procedure
+
+Bring down the link between ATE:port2 and DUT:port2 using OTG api.
+
+### Verifications
+
+*   BGP routes advertised from ATE:port1,port2 must have 1 nexthop.
+*   IS-IS routes advertised from ATE:port3 must have one next hop.
+*   BGP routes advertised from ATE:port3 must have 2 next hops pointing to tunnels.
+*   For verifying prefix, nexthop groups, next hop use the leaves mentioed in the path section.
+*   Verify afts prefix advertised by BGP,ISIS.
+*   Verify its next hop group, number of next hop and its interfaces.
+*   Verify the number of next hop is same as expected.
+
+## AFT-1.1.2: AFT Base Link Down scenario 2
+
+### Procedure
+
+Bring down both links between ATE:port1,port2 and DUT:port1,port2 using OTG api.
+
+### Verifications
+
+*   BGP routes advertised from ATE:port1,port2 must be removed from RIB,FIB of the DUT, query results nil.
+*   IS-IS routes advertised from ATE:port3 must have one next hop.
+*   BGP routes advertised from ATE:port3 must have 2 next hops pointing to tunnels.
+*   For verifying prefix, nexthop groups, next hop use the leaves mentioed in the path section.
+*   Verify afts prefix advertised by BGP,ISIS.
+*   Verify its next hop group, number of next hop and its interfaces.
+*   Verify the number of next hop is same as expected.
+
+## AFT-1.1.3: AFT Base Link Up scenario 1
+
+### Procedure
+
+Bring up link between ATE:port1 and DUT:port1 using OTG api.
+
+### Verifications
+
+*   BGP routes advertised from ATE:port1,port2 must have one next hop.
+*   IS-IS routes advertised from ATE:port3 must have one next hop.
+*   BGP routes advertised from ATE:port3 must have 2 next hops pointing to tunnels.
+*   Verify afts prefix advertised by BGP,ISIS.
+*   For verifying prefix, nexthop groups, next hop use the leaves mentioed in the path section.
+*   Verify its next hop group, number of next hop and its interfaces.
+*   Verify the number of next hop is same as expected.
+
+## AFT-1.1.4: AFT Base Link Up scenario 2
+
+### Procedure
+
+Bring up both link between ATE:port1,port2 and DUT:port1,port2 using OTG api.
+
+### Verifications
+
+*   BGP routes advertised from ATE:port1,port2 must have 2 next hops.
+*   IS-IS routes advertised from ATE:port3 must have one next hop.
+*   BGP routes advertised from ATE:port3 must have 2 next hops pointing to tunnels.
+*   For verifying prefix, nexthop groups, next hop use the leaves mentioed in the path section.
+*   Verify afts prefix advertised by BGP,ISIS.
+*   Verify its next hop group, number of next hop and its interfaces.
+*   Verify the number of next hop is same as expected.
+
+## OpenConfig Path and RPC Coverage
+
+The below yaml defines the OC paths intended to be covered by this test.  OC paths used for test setup are not listed here.
+
+```yaml
+paths:
+  ## Config Paths ##
+
+
+  ## State Paths ##
+
+  /network-instances/network-instance/afts/ethernet/mac-entry/state/next-hop-group:
+  /network-instances/network-instance/afts/ipv4-unicast/ipv4-entry/state/next-hop-group:
+  /network-instances/network-instance/afts/ipv4-unicast/ipv4-entry/state/origin-protocol:
+  /network-instances/network-instance/afts/ipv4-unicast/ipv4-entry/state/prefix:
+  /network-instances/network-instance/afts/ipv6-unicast/ipv6-entry/state/next-hop-group:
+  /network-instances/network-instance/afts/ipv6-unicast/ipv6-entry/state/origin-protocol:
+  /network-instances/network-instance/afts/ipv6-unicast/ipv6-entry/state/prefix:
+  /network-instances/network-instance/afts/aft-summaries/ipv4-unicast/protocols/protocol/state/origin-protocol:
+  /network-instances/network-instance/afts/aft-summaries/ipv4-unicast/protocols/protocol/state/counters/aft-entries:
+  /network-instances/network-instance/afts/aft-summaries/ipv6-unicast/protocols/protocol/state/origin-protocol:
+  /network-instances/network-instance/afts/aft-summaries/ipv6-unicast/protocols/protocol/state/counters/aft-entries:
+  /network-instances/network-instance/afts/next-hop-groups/next-hop-group/id:
+  /network-instances/network-instance/afts/next-hop-groups/next-hop-group/next-hops/next-hop/index:
+  /network-instances/network-instance/afts/next-hop-groups/next-hop-group/next-hops/next-hop/state/index:
+  /network-instances/network-instance/afts/next-hop-groups/next-hop-group/next-hops/next-hop/state/weight:
+  /network-instances/network-instance/afts/next-hop-groups/next-hop-group/state/backup-next-hop-group:
+  /network-instances/network-instance/afts/next-hop-groups/next-hop-group/state/id:
+  /network-instances/network-instance/afts/next-hops/next-hop/index:
+  /network-instances/network-instance/afts/next-hops/next-hop/interface-ref/state/interface:
+  /network-instances/network-instance/afts/next-hops/next-hop/interface-ref/state/subinterface:
+  /network-instances/network-instance/afts/next-hops/next-hop/state/encapsulate-header:
+  /network-instances/network-instance/afts/next-hops/next-hop/state/index:
+  /network-instances/network-instance/afts/next-hops/next-hop/state/ip-address:
+  /network-instances/network-instance/afts/next-hops/next-hop/state/mac-address:
+  /network-instances/network-instance/afts/next-hops/next-hop/state/origin-protocol:
+  /network-instances/network-instance/afts/state-synced/state/ipv4-unicast:
+  /network-instances/network-instance/afts/state-synced/state/ipv6-unicast:
+  /network-instances/network-instance/afts/ipv4-unicast/ipv4-entry/state/entry-metadata:
+  /network-instances/network-instance/afts/ipv4-unicast/ipv4-entry/state/next-hop-group-network-instance:
+  /network-instances/network-instance/afts/ipv4-unicast/ipv4-entry/state/origin-network-instance:
+  /network-instances/network-instance/afts/ipv6-unicast/ipv6-entry/state/entry-metadata:
+  /network-instances/network-instance/afts/ipv6-unicast/ipv6-entry/state/next-hop-group-network-instance:
+  /network-instances/network-instance/afts/ipv6-unicast/ipv6-entry/state/origin-network-instance:
+  /network-instances/network-instance/afts/ipv4-unicast/ipv4-entry/prefix:
+  /network-instances/network-instance/afts/ipv6-unicast/ipv6-entry/prefix:
+
+rpcs:
+  gnmi:
+    gNMI.Subscribe:
+```
+
+## Control Protocol Coverage
+
+BGP
+IS-IS
+RSVP
+MPLS
+
+## Minimum DUT Platform Requirement
+
+vRX

feature/aft/aft_base/otg_tests/aft_prefixcounters/README.md

@@ -0,0 +1,178 @@
+# AFT-2.1: AFTs Prefix Counters
+
+## Summary
+
+IPv4/IPv6 prefix counters
+
+## Testbed
+
+* atedut_12.binding
+
+## Test Setup
+
+### Generate DUT and ATE Configuration
+
+Configure DUT:port1 for IS-IS session with ATE:port1
+*   IS-IS must be level 2 only with wide metric.
+*   IS-IS must be point to point.
+*   Send 1000 ipv4 and 1000 ipv6 IS-IS prefixes from ATE:port1 to DUT:port1.
+
+Establish eBGP sessions between ATE:port1 and DUT:port1.
+*   Configure eBGP over the interface ip.
+*   Advertise 1000 ipv4,ipv6 prefixes from ATE port1 observe received prefixes at DUT.
+
+### Procedure
+
+*   Gnmi set with REPLACE option to push the configuration DUT.
+*   ATE configuration must be pushed.
+
+### verifications
+
+*   BGP routes advertised from ATE:port1 must have 1 nexthop.
+*   IS-IS routes advertised from ATE:port1 must have one next hop.
+*   Use gnmi Subscribe with ON_CHANGE option to /network-instances/network-instance/afts.
+*   Verify afts prefix entries using the following paths with in a timeout of 30s.
+
+/network-instances/network-instance/afts/ipv4-unicast/ipv4-entry/state/prefix,
+/network-instances/network-instance/afts/ipv6-unicast/ipv6-entry/state/prefix
+
+
+
+## AFT-2.1.1: AFT Prefix Counters ipv4 packets forwarded, ipv4 octets forwarded IS-IS route.
+
+### Procedure
+
+From ATE:port2 send 10000 packets to one of the ipv4 prefix advertise by IS-IS.
+
+### Verifications
+
+*  Before the traffic measure the initial counter value.
+*  After the traffic measure the final counter value.
+*  The difference between final and initial value must match with the counter value in ATE then the test is marked as passed.
+*  Verify afts ipv4 forwarded packets and ipv4 forwarded octets counter entries using the path mentioned in the paths section of this test plan.
+
+## AFT-2.1.2: AFT Prefix Counters ipv4 packets forwarded, ipv4 octets forwarded BGP route.
+
+### Procedure
+
+From ATE:port2 send 10000 packets to one of the ipv4 prefix advertise by BGP.
+
+### Verifications
+
+*  Before the traffic measure the initial counter value.
+*  After the traffic measure the final counter value.
+*  The difference between final and initial value must match with the counter value in ATE, then the test is marked as passed.
+*  Verify afts ipv4 forwarded packets and ipv4 forwarded octets counter entries using the path mentioned in the paths section of this test plan.
+
+
+## AFT-2.1.3: AFT Prefix Counters ipv6 packets forwarded, ipv6 octets forwarded IS-IS route.
+
+### Procedure
+
+From ATE:port2 send 10000 packets to one of the ipv6 prefix advertise by IS-IS.
+
+### Verifications
+
+*  Before the traffic measure the initial counter value.
+*  After the traffic measure the final counter value.
+*  The difference between final and initial value must match with the counter value in ATE, then the test is marked as passed.
+*  Verify afts ipv6 forwarded packets and ipv6 forwarded octets counter entries using the path mentioned in the paths section of this test plan.
+
+## AFT-2.1.4: AFT Prefix Counters ipv6 packets forwarded, ipv6 octets forwarded BGP route.
+
+### Procedure
+
+From ATE:port2 send 10000 packets to one of the ipv6 prefix advertise by BGP.
+
+### Verifications
+
+*  Before the traffic measure the initial counter value.
+*  After the traffic measure the final counter value.
+*  The difference between final and initial value must match with the counter value in ATE, then the test is marked as passed.
+*  Verify afts ipv6 forwarded packets and ipv6 forwarded octets counter entries using the path mentioned in the paths section of this test plan.
+
+## AFT-2.1.5: AFT Prefix Counters withdraw the ipv4 prefix.
+
+### Procedure
+
+*  From ATE:port1 withdraw some prefixes of BGP and IS-IS.
+*  Send 10000 packets from ATE:port2 to DUT:port2 for one of the withdrawn ipv4 prefix.
+*  The traffic must blackhole.
+
+### Verifications
+
+* The counters must not send incremental value as the prefix is not present in RIB/FIB. The test fails if the counter shows incremental values.
+* Verify afts ipv4 forwarded packet counter entries using the path mentioned in the paths section of this test plan.
+
+## AFT-2.1.6: AFT Prefix Counters add the ipv4 prefix back.
+
+### Procedure
+
+*  From ATE:port1 add the prefixes of BGP and IS-IS back.
+*  Send 10000 packets from ATE:port2 to DUT:port2 for one of the added ipv4 prefix.
+*  The traffic must flow end to end.
+
+### Verifications
+
+*  Before the traffic measure the initial counter value.
+*  After the traffic measure the final counter value.
+*  The difference between final and initial value must match with the counter value in ATE, then the test is marked as passed.
+*  Verify afts counter entries using the path mentioned in the paths section of this test plan.
+
+## AFT-2.1.7: AFT Prefix Counters withdraw the ipv6 prefix.
+
+### Procedure
+
+*  From ATE:port1 withdraw some prefixes of BGP and IS-IS.
+*  Send 10000 packets from ATE:port2 to DUT:port2 for one of the withdrawn ipv6 prefix.
+*  The traffic must blackhole.
+
+### Verifications
+
+* The counters must not send incremental value as the prefix is not present in RIB/FIB. The test fails if the counter shows incremental values.
+*  Verify afts counter entries using the path mentioned in the paths section of this test plan.
+
+## AFT-2.1.8: AFT Prefix Counters add the ipv6 prefix back.
+
+### Procedure
+
+*  From ATE:port1 add the prefixes of BGP and IS-IS back.
+*  Send 10000 packets from ATE:port2 to DUT:port2 for one of the added ipv6 prefix.
+*  The traffic must flow end to end.
+
+### Verifications
+
+*  Before the traffic measure the initial counter value.
+*  After the traffic measure the final counter value.
+*  The difference between final and initial value must match with the counter value in ATE, then the test is marked as passed.
+*  Verify afts counter entries using the path mentioned in the paths section of this test plan.
+
+## OpenConfig Path and RPC Coverage
+
+The below yaml defines the OC paths intended to be covered by this test.  OC paths used for test setup are not listed here.
+
+```yaml
+paths:
+  ## Config Paths ##
+
+  ## State Paths ##
+
+  /network-instances/network-instance/afts/ipv4-unicast/ipv4-entry/state/counters/octets-forwarded:
+  /network-instances/network-instance/afts/ipv4-unicast/ipv4-entry/state/counters/packets-forwarded:
+  /network-instances/network-instance/afts/ipv6-unicast/ipv6-entry/state/counters/octets-forwarded:
+  /network-instances/network-instance/afts/ipv6-unicast/ipv6-entry/state/counters/packets-forwarded:
+
+
+rpcs:
+  gnmi:
+    gNMI.Subscribe:
+```
+
+## Control Protocol Coverage
+
+BGP
+IS-IS
+
+## Minimum DUT Platform Requirement
+
+vRX

testregistry.textproto

@@ -1773,3 +1773,15 @@ test: {
   readme: "https://github.com/openconfig/featureprofiles/blob/main/feature/container/networking/tests/container_connectivity/README.md"
   exec: " "
 }
+test: {
+  id: "AFT-1.1"
+  description: "AFT Streaming"
+  readme: "https://github.com/openconfig/featureprofiles/blob/main/feature/aft/aft_base/otg_tests/aft_base/README.md"
+  exec: " "
+}
+test: {
+  id: "AFT-2.1"
+  description: "AFT Streaming"
+  readme: "https://github.com/openconfig/featureprofiles/blob/main/feature/aft/aft_base/otg_tests/aft_prefixcounters/README.md"
+  exec: " "
+}