-
Notifications
You must be signed in to change notification settings - Fork 151
link_bandwidth_test
Github Action edited this page Oct 17, 2024
·
4 revisions
Configure bgp policy to match, add and delete statically configured BGP link bandwidth communities to routes based on a prefix match.
-
Testbed configuration - Setup external BGP sessions and prefixes.
- Generate config for 2 DUT and ATE ports where:
- DUT port 1 to ATE port 1 EBGP session.
- DUT port 2 to ATE port 2 IBGP session.
- Configure dummy accept policies and attach it to both sessions on DUT.
- Create a
/routing-policy/policy-definitions/policy-definition/policy-definitionnamed 'allow_all' with the followingstatements- statement[name='allow-all']/
- actions/config/policy-result = ACCEPT_ROUTE
- statement[name='allow-all']/
- Use
/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policyto apply the policy on the DUT bgp neighbor to the ATE port 1.
- Create a
- Configure ATE port 1 with a BGP session to DUT port 1.
- Advertise ipv4 and ipv6 prefixes to DUT port 1 using the following communities:
- prefix-set-1 with 2 ipv4 and 2 ipv6 routes without communities.
- prefix-set-2 with 2 ipv4 and 2 ipv6 routes with communities
[ "100:100" ]. - [TODO value change] prefix-set-3 with 2 ipv4 and 2 ipv6 routes with extended communities
[ "link-bandwidth:23456:1000" ].
- Advertise ipv4 and ipv6 prefixes to DUT port 1 using the following communities:
- Configure Send community knob to IBGP neigbour to advertise the communities to IBGP peer
- [TODO] use
/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/config/send-community-typeleaf-list with value[STANDARD EXTENDED].
- [TODO] use
- Generate config for 2 DUT and ATE ports where:
-
RT-7.5.1 - Validate bgp sessions and traffic
- For IPv4 and IPv6 prefixes:
- Observe received prefixes at ATE port-2.
- Generate traffic from ATE port-2 to ATE port-1.
- Verify traffic is received on ATE port 1 for advertised prefixes. routes.
- For IPv4 and IPv6 prefixes:
-
RT-7.5.2 - Validate adding and removing link-bandwidth ext-community-sets using OC model release 3.x
-
Configure the following extended community sets on the DUT: (prefix:
routing-policy/defined-sets/bgp-defined-sets/ext-community-sets/ext-community-set)- Create an ext-community-set named 'linkbw_1M' with members as follows:
- ext-community-member = [ "link-bandwidth:23456:1M" ]
- Create an ext-community-set named 'linkbw_2G' with members as follows:
- ext-community-member = [ "link-bandwidth:23456:2G" ]
- Create an community-set named 'regex_match_comm100' with members as follows:
- community-member = [ "^100:.*$" ]
- Create an ext-community-set named 'linkbw_any' with members as follows:
- ext-community-member = [ "^link-bandwidth:.:.$" ]
- Create an ext-community-set named 'linkbw_1M' with members as follows:
-
Create a
/routing-policy/policy-definitions/policy-definition/policy-definitionnamed 'not_match_100_set_linkbw_1M' with the followingstatements- statement[name='1-megabit-match']/
- conditions/bgp-conditions/match-community-set/config/community-set = 'regex_match_comm100'
- conditions/bgp-conditions/match-community-set/config/match-set-options = INVERT
- actions/bgp-actions/set-ext-community/reference/config/ext-community-set-refs = 'linkbw_1M'
- actions/config/policy-result = NEXT_STATEMENT
- statement[name='accept_all_routes']/
- actions/config/policy-result = ACCEPT_ROUTE
- statement[name='1-megabit-match']/
-
Create a
/routing-policy/policy-definitions/policy-definition/policy-definitionnamed 'match_100_set_linkbw_2G' with the followingstatements- statement[name='2-gigabit-match']/
- conditions/bgp-conditions/match-community-set/config/community-set = 'regex_match_comm100'
- conditions/bgp-conditions/match-community-set/config/match-set-options = ANY
- actions/bgp-actions/set-ext-community/reference/config/ext-community-set-refs = 'linkbw_2G'
- actions/config/policy-result = NEXT_STATEMENT
- statement[name='accept_all_routes']/
- actions/config/policy-result = ACCEPT_ROUTE
- statement[name='2-gigabit-match']/
-
Create a
/routing-policy/policy-definitions/policy-definition/policy-definitionnamed 'del_linkbw' with the followingstatements- statement[name='del_linkbw']/
- actions/bgp-actions/set-ext-community/config/options = 'REMOVE'
- actions/bgp-actions/set-ext-community/config/method = 'REFERENCE'
- actions/bgp-actions/set-ext-community/reference/config/ext-community-set-refs = 'linkbw_any'
- actions/config/policy-result = NEXT_STATEMENT
- statement[name='accept_all_routes']/
- actions/config/policy-result = ACCEPT_ROUTE
- statement[name='del_linkbw']/
-
For each policy-definition created, run a subtest (RT-7.5.3.x-<policy_name_here>-import) to
-
Use gnmi Set REPLACE option for:
-
/routing-policy/policy-definitionsto configure the policy - Use
/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policyto apply the policy on the DUT bgp neighbor to the ATE port 1.
-
-
Verify expected communities are present in ATE.
-
Verify expected communities are present in DUT state.
- Do not fail test if this path is not supported, only log results
/network-instances/network-instance/protocols/protocol/bgp/rib/afi-safis/afi-safi/ipv4-unicast/neighbors/neighbor/adj-rib-in-post/routes/route/state/ext-community-index/network-instances/network-instance/protocols/protocol/bgp/rib/afi-safis/afi-safi/ipv6-unicast/neighbors/neighbor/adj-rib-in-post/routes/route/state/ext-community-index
- Mark test as passing if Global Administartive valuee (ASN) of link-bakdwidth extended community send by DUT is either
23456or ASN of DUT.
- Do not fail test if this path is not supported, only log results
-
Expected community values for each policy
set_linkbw_0 not_match_100_set_linkbw_1M prefix-set-1 DEPRECATED [ "link-bandwidth:23456:1000000" ] prefix-set-2 DEPRECATED [ "100:100" ] prefix-set-3 DEPRECATED [ "link-bandwidth:23456:1000000" ] match_100_set_linkbw_2G del_linkbw rm_any_zero_bw_set_LocPref_5 prefix-set-1 [ none ] [none] DEPRECATED prefix-set-2 [ "100:100", "link-bandwidth:23456:2000000000" ] [ "100:100" ] DEPRECATED prefix-set-3 [ "link-bandwidth:23456:1000" ] [ none ] DEPRECATED - Regarding prefix-set-3 and policy "nomatch_100_set_linkbw_2G"
- prefix-set-3 is advertised to the DUT with community "link-bandwidth:100:0" set.
- The DUT evaluates a match for "regex_nomatch_as100". This does not match because the regex pattern does not include the link-bandwidth community type.
- Community linkbw_2G should be added.
- Regarding prefix-set-3 and policy "nomatch_100_set_linkbw_2G"
-
-
[TODO] For each policy-definition created, run a subtest (RT-7.5.4.x-<policy_name_here>-export) to
-
Use gnmi Set REPLACE option to attach
allow_allpolicy using/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policyto apply the policy on the DUT bgp neighbor to the ATE port 1. -
Use gnmi Set REPLACE option for:
-
/routing-policy/policy-definitionsto configure the policy - Use
/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policyto apply the policy on the DUT bgp neighbor to the ATE port 2.
-
-
Verify expected communities are present in ATE port 2.
- Mark test as passing if Global Administartive valuee (ASN) of link-bakdwidth extended community send by DUT is either
23456or ASN of DUT.
- Mark test as passing if Global Administartive valuee (ASN) of link-bakdwidth extended community send by DUT is either
-
Expected community values for each policy
set_linkbw_0 not_match_100_set_linkbw_1M prefix-set-1 DEPRECATED [ "link-bandwidth:23456:1000000" ] prefix-set-2 DEPRECATED [ "100:100" ] prefix-set-3 DEPRECATED [ "link-bandwidth:23456:1000000" ] match_100_set_linkbw_2G del_linkbw rm_any_zero_bw_set_LocPref_5 prefix-set-1 [ none ] [none] DEPRECATED prefix-set-2 [ "100:100", "link-bandwidth:23456:2000000000" ] [ "100:100" ] DEPRECATED prefix-set-3 [ "link-bandwidth:23456:1000" ] [ none ] DEPRECATED -
Regarding prefix-set-3 and policy "nomatch_100_set_linkbw_2G"
- prefix-set-3 is advertised to the DUT with community "link-bandwidth:100:0" set.
- The DUT evaluates a match for "regex_nomatch_as100". This does not match because the regex pattern does not include the link-bandwidth community type.
- Community linkbw_2G should be added.
The below yaml defines the OC paths intended to be covered by this test. OC paths used for test setup are not listed here.
paths:
## Config Parameter Coverage
## Configuration to enable advertise communities to bgp peer
/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/config/send-community-type:
## Policy for community-set configuration
/routing-policy/defined-sets/bgp-defined-sets/ext-community-sets/ext-community-set/config/ext-community-set-name:
/routing-policy/defined-sets/bgp-defined-sets/ext-community-sets/ext-community-set/config/ext-community-member:
## Policy action configuration
/routing-policy/policy-definitions/policy-definition/config/name:
/routing-policy/policy-definitions/policy-definition/statements/statement/config/name:
/routing-policy/policy-definitions/policy-definition/statements/statement/actions/config/policy-result:
/routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/set-ext-community/config/options:
/routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/set-community/config/method:
/routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/set-ext-community/reference/config/ext-community-set-refs:
/routing-policy/policy-definitions/policy-definition/statements/statement/actions/bgp-actions/config/set-local-pref:
## Policy for community-set match configuration
/routing-policy/policy-definitions/policy-definition/statements/statement/conditions/bgp-conditions/match-ext-community-set/config/ext-community-set:
/routing-policy/policy-definitions/policy-definition/statements/statement/conditions/bgp-conditions/match-ext-community-set/config/match-set-options:
## Policy attachment point configuration
/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/import-policy:
/network-instances/network-instance/protocols/protocol/bgp/neighbors/neighbor/afi-safis/afi-safi/apply-policy/config/export-policy:
/network-instances/network-instance/protocols/protocol/bgp/peer-groups/peer-group/apply-policy/config/import-policy:
/network-instances/network-instance/protocols/protocol/bgp/peer-groups/peer-group/apply-policy/config/export-policy:
## Telemetry Parameter Coverage
/network-instances/network-instance/protocols/protocol/bgp/rib/afi-safis/afi-safi/ipv4-unicast/neighbors/neighbor/adj-rib-in-post/routes/route/state/ext-community-index:
/network-instances/network-instance/protocols/protocol/bgp/rib/afi-safis/afi-safi/ipv6-unicast/neighbors/neighbor/adj-rib-in-post/routes/route/state/ext-community-index:
rpcs:
gnmi:
gNMI.Subscribe:vRX - Virtual Router Device
-
Home
- Test Plans
- ACCTZ-1.1: Record Subscribe Full
- ACCTZ-2.1: Record Subscribe Partial
- ACCTZ-3.1: Record Subscribe Non-gRPC
- ACCTZ-4.1: Record History Truncation
- ACCTZ-4.2: Record Payload Truncation
- Authz: General Authz (1-4) tests
- CNTR-1: Basic container lifecycle via
gnoi.Containerz. - CNTR-2: Container network connectivity tests
- Credentialz-1: Password console login
- Credentialz-2: SSH Password Login Disallowed
- Credentialz-3: Host Certificates
- Credentialz-4: SSH Public Key Authentication
- Credentialz-5: Hiba Authentication
- DP-1.2: QoS policy feature config
- DP-1.3: QoS ECN feature config
- DP-1.4: QoS Interface Output Queue Counters
- DP-1.7: One strict priority queue traffic test
- DP-1.8: Two strict priority queue traffic test
- DP-1.9: WRR traffic test
- DP-1.10: Mixed strict priority and WRR traffic test
- DP-1.11: Bursty traffic test
- DP-1.14: QoS basic test
- example-0.1: Topology Test
- FP-1.1: Power admin DOWN/UP Test
- gNMI-1.1: cli Origin
- gNMI-1.2: Benchmarking: Full Configuration Replace
- gNMI-1.3: Benchmarking: Drained Configuration Convergence Time
- gNMI-1.4: Telemetry: Inventory
- gNMI-1.5: Telemetry: Port Speed Test
- gNMI-1.8: Configuration Metadata-only Retrieve and Replace
- gNMI-1.9: Get requests
- gNMI-1.10: Telemetry: Basic Check
- gNMI-1.11: Telemetry: Interface Packet Counters
- gNMI-1.12: Mixed OpenConfig/CLI Origin
- gNMI-1.13: Optics Telemetry, Instant, threshold, and miscellaneous static info
- gNMI-1.14: OpenConfig metadata consistency during large config push
- gNMI-1.15: Set Requests
- gNMI-1.16: fabric redundancy test
- gNMI-1.17: Controller Card redundancy test
- gNMI-1.18: gNMI subscribe with sample mode for backplane capacity counters
- gNMI-1.19: ConfigPush after Control Card switchover
- gNMI-1.20: Telemetry: Optics Thresholds
- gNMI-1.21: Integrated Circuit Hardware Resource Utilization Test
- gNMI-1.22: Controller card port attributes
- gNMI-1.27: gNMI Sample Mode Test
- GNMI-2: gnmi_subscriptionlist_test
- gNOI-2.1: Packet-based Link Qualification
- gNOI-3.1: Complete Chassis Reboot
- gNOI-3.2: Per-Component Reboot
- gNOI-3.3: Supervisor Switchover
- gNOI-3.4: Chassis Reboot Status and Reboot Cancellation
- gNOI-4.1: Software Upgrade
- gNOI-5.1: Ping Test
- gNOI-5.2: Traceroute Test
- gNOI-5.3: Copying Debug Files
- gNOI-6.1: Factory Reset
- Health-1.1: Generic Health Check
- Health-1.2: Healthz component status paths
- MGT-1: Management HA solution test
- MTU-1.3: Large IP Packet Transmission
- OC-1.2: Default Address Families
- OC-26.1: Network Time Protocol (NTP)
- P4RT-1.1: Base P4RT Functionality
- P4RT-1.2: P4RT Daemon Failure
- P4RT-2.1: P4RT Election
- P4RT-2.2: P4RT Metadata Validation
- P4RT-3.1: Google Discovery Protocol: PacketIn
- P4RT-3.2: Google Discovery Protocol: PacketOut
- P4RT-3.21: Google Discovery Protocol: PacketOut with LAG
- P4RT-5.1: Traceroute: PacketIn
- P4RT-5.2: Traceroute Packetout
- P4RT-5.3: Traceroute: PacketIn With VRF Selection
- P4RT-6.1: Required Packet I/O rate: Performance
- P4RT-7.1: LLDP: PacketIn
- P4RT-7.2: LLDP: PacketOut
- Replay-1.0: Record/replay presession test
- Replay-1.1: Record/replay diff command trees test
- Replay-1.2: P4RT Replay Test
- RT-1.1: Base BGP Session Parameters
- RT-1.2: BGP Policy & Route Installation
- RT-1.3: BGP Route Propagation
- RT-1.4: BGP Graceful Restart
- RT-1.5: BGP Prefix Limit
- RT-1.7: Local BGP Test
- RT-1.10: BGP Keepalive and HoldTimer Configuration Test
- RT-1.11: BGP remove private AS
- RT-1.12: BGP always compare MED
- RT-1.14: BGP Long-Lived Graceful Restart
- RT-1.19: BGP 2-Byte and 4-Byte ASN support
- RT-1.21: BGP TCP MSS and PMTUD
- RT-1.23: BGP AFI SAFI OC DEFAULTS
- RT-1.24: BGP 2-Byte and 4-Byte ASN support with policy
- RT-1.25: Management network-instance default static route
- RT-1.26: Basic static route support
- RT-1.27: Static route to BGP redistribution
- RT-1.28: BGP to IS-IS redistribution
- RT-1.29: BGP chained import/export policy attachment
- RT-1.30: BGP nested import/export policy attachment
- RT-1.32: BGP policy actions - MED, LocPref, prepend, flow-control
- RT-1.33: BGP Policy with prefix-set matching
- RT-1.34: BGP route-distance configuration
- RT-1.51: BGP multipath ECMP
- RT-1.52: BGP multipath UCMP support with Link Bandwidth Community
- RT-1.53: prefix-list test
- RT-1.54: BGP Override AS-path split-horizon
- RT-1.55: BGP session mode (active/passive)
- RT-2.1: Base IS-IS Process and Adjacencies
- RT-2.2: IS-IS LSP Updates
- RT-2.6: IS-IS Hello-Padding enabled at interface level
- RT-2.7: IS-IS Passive is enabled at interface level
- RT-2.8: IS-IS metric style wide not enabled
- RT-2.9: IS-IS metric style wide enabled
- RT-2.10: IS-IS change LSP lifetime
- RT-2.11: IS-IS Passive is enabled at the area level
- RT-2.12: Static route to IS-IS redistribution
- RT-2.13: Weighted-ECMP for IS-IS
- RT-2.14: IS-IS Drain Test
- RT-2.15: IS-IS Graceful Restart Helper
- RT-3.1: Policy based VRF selection
- RT-3.2: Multiple <Protocol, DSCP> Rules for VRF Selection
- RT-4.10: AFTs Route Summary
- RT-4.11: AFTs Route Summary
- RT-5.1: Singleton Interface
- RT-5.2: Aggregate Interfaces
- RT-5.3: Aggregate Balancing
- RT-5.4: Aggregate Forwarding Viable
- RT-5.5: Interface hold-time
- RT-5.6: Interface Loopback mode
- RT-5.7: Aggregate Not Viable All
- RT-5.8: IPv6 Link Local
- RT-5.9: Disable IPv6 ND Router Arvetisment
- RT-5.10: IPv6 Link Local generated by SLAAC
- RT-6.1: Core LLDP TLV Population
- RT-7.1: BGP default policies
- RT-7.2: BGP Policy Community Set
- RT-7.3: BGP Policy AS Path Set
- RT-7.4: BGP Policy AS Path Set and Community Set
- RT-7.5: BGP Policy - Match and Set Link Bandwidth Community
- RT-7.8: BGP Policy Match Standard Community and Add Community Import/Export Policy
- RT-7.11: BGP Policy - Import/Export Policy Action Using Multiple Criteria
- RT-14.2: GRIBI Route Test
- SEC-3.1: Authentication
- SFLOW-1: sFlow Configuration and Sampling
- System-1: System testing
- TE-1.1: Static ARP
- TE-1.2: My Station MAC
- TE-2.1: gRIBI IPv4 Entry
- TE-2.2: gRIBI IPv4 Entry With Aggregate Ports
- TE-3.1: Base Hierarchical Route Installation
- TE-3.2: Traffic Balancing According to Weights
- TE-3.3: Hierarchical weight resolution
- TE-3.5: Ordering: ACK Received
- TE-3.6: ACK in the Presence of Other Routes
- TE-3.7: Base Hierarchical NHG Update
- TE-3.31: Hierarchical weight resolution with PBF
- TE-4.1: Base Leader Election
- TE-4.2: Persistence Mode
- TE-5.1: gRIBI Get RPC
- TE-6.1: Route Removal via Flush
- TE-6.2: Route Removal In Non Default VRF
- TE-8.1: DUT Daemon Failure
- TE-8.2: Supervisor Failure
- TE-9.2: MPLS based forwarding Static LSP
- TE-9.3: FIB FAILURE DUE TO HARDWARE RESOURCE EXHAUST
- TE-9: gRIBI MPLS Compliance
- TE-10: gRIBI MPLS Forwarding
- TE-11.1: Backup NHG: Single NH
- TE-11.2: Backup NHG: Multiple NH
- TE-11.3: Backup NHG: Actions
- TE-11.21: Backup NHG: Multiple NH with PBF
- TE-11.31: Backup NHG: Actions with PBF
- TE-13.1: gRIBI route ADD during Failover
- TE-13.2: gRIBI route DELETE during Failover
- TE-14.1: gRIBI Scaling
- TE-14.2: encap and decap scale
- TE-15.1: gRIBI Compliance
- TE-16.1: basic encapsulation tests
- TE-16.2: encapsulation FRR scenarios
- TE-16.3: encapsulation FRR scenarios
- TE-17.1: VRF selection policy driven TE
- TR-6.1: Remote Syslog feature config
- TRANSCEIVER-1: Telemetry: 400ZR Chromatic Dispersion(CD) telemetry values streaming
- TRANSCEIVER-3: Telemetry: 400ZR Optics firmware version streaming
- TRANSCEIVER-4: Telemetry: 400ZR RX input and TX output power telemetry values streaming.
- TRANSCEIVER-5: Configuration: 400ZR channel frequency, output TX launch power and operational mode setting.
- TRANSCEIVER-6: Telemetry: 400ZR Optics performance metrics (pm) streaming.
- TRANSCEIVER-7: Telemetry: 400ZR Optics inventory info streaming
- TRANSCEIVER-8: Telemetry: 400ZR Optics module temperature streaming.
- TRANSCEIVER-9: Telemetry: 400ZR TX laser bias current telemetry values streaming.
- TRANSCEIVER-10: Telemetry: 400ZR Optics FEC(Forward Error Correction) Uncorrectable Frames Streaming.
- TRANSCEIVER-11: Telemetry: 400ZR Optics logical channels provisioning and related telemetry.
- TRANSCEIVER-12: Telemetry: 400ZR Transceiver Supply Voltage streaming.
- TRANSCEIVER-13: Configuration: 400ZR Transceiver Low Power Mode Setting.
- TUN-1.4: Interface based IPv6 GRE Encapsulation
- TUN-1.9: GRE inner packet DSCP
- Test Plans