AD40xx Platform block diagrams

Board Block Diagrams

Trenz TEI0022 Block Diagram

The Trenz TEI0022 board contains 2 FPGA devices and many peripheral devices. The Primary FPGA is the Cyclone V SoC and the MAX10 FPGA has a support role in monitoring power rails, reading push buttons, driving LED's, and optionally configuring the Cyclone V SoC.

The major components of the Trenz Cyclone-V SoC Development Kit are identified by numbers:

[Intel Cyclone-V SoC]

SX Processor:
- Single or Dual ARM Cortex® A9 MPU
- Up to 925 MHz max clock speed
- 32KB L1 Program Cache (per core)
- 32KB L1 Data Cache (per core)
- 512 KB L2 Cache (shared)
- 181 HPS I/O pins
- 1 Hard Memory Controller (LPDDR2, DDR2, DDR3)
FPGA Fabric:
- Up to 110K Logic Elements (LE)
- Up to 5.5Mb M10K Memory
- Up to 621Kb MLAB Memory
- Up To 112 Variable Precision DSP blocks
- Up to 224 18x18 multipliers
- Up to 288 User FPGA I/O pins
- 1 Hard Memory Controller (LPDDR2, DDR2, DDR3)

FPGA DDR3

HPS DDR3

FMC LPC Connector

PMOD x4

microSD Card Connector

Ethernet PHY

RJ-45 Ethernet Connector

USB PHY

USB HUB

dual USB-A Connector

HDMI Transmitter

HDMI Connector

Intel MAX10-

micro-USB to UART Interface

USB to JTAG and UART

micro-USB to JTAG and UART Connector

SMA Connector

Push Button

LED

4-bit DIP Switch

12 VDC Power Jack

Clock Generator

Programmable Clock Generator

QSPI for HPS

QSPI for FPGA

Temperature Sensor

EEPROM

Analog Devices AD400x Block Diagram

The EVAL-AD400xFMCZ is a family of boards.

The EVAL-AD4000FMCZ/EVAL-AD4001FMCZ/EVAL-AD4002FMCZ/EVAL-AD4003FMCZ/EVAL-AD4020FMCZ evaluation boards support the AD4000BRMZ, AD4001BRMZ, AD4002BRMZ, AD4003BRMZ, and AD4020BRMZ devices respectively. However, these boards can be used to evaluate the performance of the AD4004, AD4005, AD4006, AD4007, AD4008, AD4010, AD4011, AD4021, and AD4022 by limiting the sample rate in the evaluation software to the maximum sample rate of the specific ADC. For example, the AD4000 on the EVAL-AD4000FMCZ can be used to evaluate the performance of the AD4004 if the sample rate is limited to 1 MSPS. See the data sheet of each product for the corresponding evaluation board.

On-board components include a high precision buffered band gap 5.0 V reference (ADR4550), a reference buffer (ADA4807-1), a common-mode buffer (ADA4807-1), a signal conditioning circuit with two op amps (ADA4807-1), and a power supply to derive the necessary voltage levels to supply all voltage needs.